WHAT DID YOU DO TO YOUR FRS TODAY?

[wrxgoose]

Originally Posted by Nickse30

You should have more than 200whp somthings wrong, im guessing the tune...

I dynod at another shop, and they showed 173 whp.

[CamryDS]

Installed the trunk liner and the hand brake boot

Sent from my PG86100

[Cyau]

Got my tow hook license plate installed! Instant 20WHP gain!

[Nothing]

Originally Posted by supra2nv

measurement is here no?
http://www.trdparts.jp/conceptcar/86...rts_other.html

Sweet! Thanks!

Originally Posted by Nickse30

And what is SRI?

Short ram intake

[Nickse30]

Originally Posted by wrxgoose

I dynod at another shop, and they showed 173 whp.

Man make sure u have the tune cause with all thoes mods and tune u should see 220-230whp 170 is ok with all the mods and no tune. actually not really the car stock is like 160-170 right? its 200 at crank minus 20-30% for loss in drive line and gears, maybe its not a good map for ur mods or they just didnt map it. what did the other dyno shop say did they see a map? and what dyno were they using the same kind? casue dynos differ but not 50hp
and i knw mustang dynos r shit this is what i heard they dont give accurate readings.

check it out and let us knw cause im goin after the same mods CAI, headers and catback + light weight pulleys if theres not that much gain ill save my money for a turbo kit

[Nickse30]

Originally Posted by Nothing

Sweet! Thanks!




Short ram intake

yaya stupid me ur right its like short ram but im gona make a heat shield enclosure that feeds from the bumper intake port like the ingen one also that foam around the filter is a heat shield so the guy who sold it says

[wrxgoose]

Originally Posted by Nickse30

Man make sure u have the tune cause with all thoes mods and tune u should see 220-230whp 170 is ok with all the mods and no tune. actually not really the car stock is like 160-170 right? its 200 at crank minus 20-30% for loss in drive line and gears, maybe its not a good map for ur mods or they just didnt map it. what did the other dyno shop say did they see a map? and what dyno were they using the same kind? casue dynos differ but not 50hp
and i knw mustang dynos r shit this is what i heard they dont give accurate readings.

check it out and let us knw cause im goin after the same mods CAI, headers and catback + light weight pulleys if theres not that much gain ill save my money for a turbo kit

all my dyno pulls have been done on a multi-roller dyno, next pull I do, I think i'll do it on a single roller.

Worst comes to worst, I'm saving up for a SC.

oh, and all my runs have been done with 932 octane

[Juvenile]

Originally Posted by Nothing

Since you're the TRD guy.

I'm not usually a sticker fan but I like the "Racing Development TRD" stickers on the door.

Like this



But I can't figure out how big they are to know what to order from ebay sellers with stickers that look like this.

Can you lend a hand?

These come in two sizes

498mm x 65mm
and
314mm x 38mm (pictured)

[vincent201089]

Raced with a Audi A4

[jeffsides]

Made decals for my AZ peeps

[BlueDubbinTDI]

Originally Posted by FRSTRM

Plastidip. Great texture and easy to apply.

Do you mean link to lug nuts?

Yes

[FRSTRM]

Originally Posted by BlueDubbinTDI

Yes

[ame="http://www.amazon.com/gp/product/B006O0I2WS/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1"]Amazon.com: Godspeed 20 Pieces 12x 1.25mm Red Color Extended Aluminum Lug Nut Lugs 12x1.25mm Wheel Nut Nuts Fit ALL Infiniti , Ex35 , Fx35 , Fx45 , G35 Coupe , G35 Sedan , G37 Coupe , G37 Sedan , G37 Roadster , G37 X Coupe , M35 M45, M37 , G20 , G25: Automotive[/ame]

[FRSTRM]

Originally Posted by FRSTRM

Amazon.com: Godspeed 20 Pieces 12x 1.25mm Red Color Extended Aluminum Lug Nut Lugs 12x1.25mm Wheel Nut Nuts Fit ALL Infiniti , Ex35 , Fx35 , Fx45 , G35 Coupe , G35 Sedan , G37 Coupe , G37 Sedan , G37 Roadster , G37 X Coupe , M35 M45, M37 , G20 , G25: Automotive

Just want to find some wheels locks that don't look quite as lame as the ones that came with the car...

[rhood168]

Before and after pics I swapped the bumpers... Let the hate begin!