work vs-xx 18x9.5 +7 front with 215/40 18x10 +13 rear with 225/40 5x100

[drtydzn12]

Originally Posted by jshadeck

Please dont "trick" someone into buying these for 3100$ saying they will fit our cars...

http://www.ft86club.com/forums/showthread.php?t=24694
^less aggressive and over -6 camber

Attachment 40322
^ your rear rim would poke more then that on a frz.

ummm that setup isn't less aggressive. he's running 18x10.5 +17 on the rear. Which I'm pretty sure is more aggressive than 18x10 +13...

[subyracer05]

Originally Posted by drtydzn12

ummm that setup isn't less aggressive. he's running 18x10.5 +17 on the rear. Which I'm pretty sure is more aggressive than 18x10 +13...

Solid point!! Again they will fit and look awesome someone just needs to do it haha

[jshadeck]

Lol. Dont forget he has alot of wheel well and fender work...

Ill just leave these here, notice he cut the metal away behind the fender...

[subyracer05]

I suppose man. I guess your not into the stance thing which is fine. But a lot of that has to do with how low you want to go. Sure if you wanna be slammed and want to turn lock to lock yeah your going to have to cut shit hell I notched my frame over two inches myself. Just because you might not understand or think its silly or stupid I feel it looks awesome. People do crazy work to either engine bays to make them fast or clean. Same thing just a culture you might not understand. To each there own. Again anyone looking to buy this wheel set up knows what they are doing and what they are trying to make or look like. It's crazy but at the end of the day everyone has a different outlook for their car and you have to do what you have to do to make it look the way you want.

[jshadeck]

Originally Posted by subyracer05

and if i can fit them on my car im sure you can fit them on your car your fenders are way wider then mine, and i was real low. you will need some camber plates and a roll and you will be golden!!

Originally Posted by subyracer05

Hmm really? I thought the fenders were bigger than mine. I know a dude that was running 18x11 on his. With some camber they fit great.

I never stated my opinion. I stated that "camber plates and a roll" will not be sufficient. And "18x11 on his" does not mean these offsets will "fit great with some camber"

Again. Glws.

[subyracer05]

Originally Posted by jshadeck

I never stated my opinion. I stated that "camber plates and a roll" will not be sufficient. And "18x11 on his" does not mean these offsets will "fit great with some camber"

Again. Glws.

Not trying to argue what so ever really I'm not. But yes with plates a roll and pull and these wheels would fit. My friend with 18x11 was deff running a good amount of camber for sure. I'm not saying its going to fit easily like a stock wheel. You will deff need to put work into the car to make them fit hands down. Depending on how low you want to go.

[jshadeck]

U keep saying 18x11, but not the offset. Which is just as if not more important than the "11" is.

Ive gone ahead and marked where these rims would fall on (well the front is off) the chart



If the owner of the car in the previous pics only needed a camber plate and a pull, id be interested to know why he carved the frame behind the front tire

Again im not against these going on a car. My only comment was based on someone who may or may not have had any clue what work would be needed asking "will these fit" (u have to assume his car is stock) and u replied " if they fit my wrx (which we now found out was notched etc) then im sure theyll fit ur car"

I see youve now come to terms with agreeing w my concerns completely, u just needed to phrase it in a manner that made it seem as if somehow u were right and i was wrong despite agreeing w me

[subyracer05]

Originally Posted by jshadeck

U keep saying 18x11, but not the offset. Which is just as if not more important than the "11" is.

Ive gone ahead and marked where these rims would fall on (well the front is off) the chart

Attachment 40748

If the owner of the car in the previous pics only needed a camber plate and a pull, id be interested to know why he carved the frame behind the front tire

Again im not against these going on a car. My only comment was based on someone who may or may not have had any clue what work would be needed asking "will these fit" (u have to assume his car is stock) and u replied " if they fit my wrx (which we now found out was notched etc) then im sure theyll fit ur car"

I see youve now come to terms with agreeing w my concerns completely, u just needed to phrase it in a manner that made it seem as if somehow u were right and i was wrong despite agreeing w me

I understand where you are coming from. I also want people to realize these are not a toss them on and your good type of wheel. I don't actually know what the offset was on the 18x11 but again he was running some serious camber.

[subyracer05]

still for sale!

[subyracer05]

someone make me an offer really need these gone thanks

[subyracer05]

to the top please

[xDBOYx]

always wanted this setup, too bad its too aggressive for our cars, free bump

[subyracer05]

Originally Posted by xDBOYx

always wanted this setup, too bad its too aggressive for our cars, free bump

thanks man! it is aggressive for most cars thats why i feel like its hard to sell these... just run more camber haha

[xDBOYx]

Originally Posted by subyracer05

thanks man! it is aggressive for most cars thats why i feel like its hard to sell these... just run more camber haha

Lol yea. Not my style though.