Some 1 tried to steal my Fog Lights?

[914_WHITE_FRS]

So one day I noticied that something was hanging from the bottom of my bumper but I thought it was just the plastic rubber that clips to the bottom of the bumper, which i took off the plastic retainers because I was about to remove my bumper soon to install a lip. So I started to really look into it further today because I kept hearing a hissing sound while driving. I stopped pulled over and finally took a more serious closer look.

It looks like someone was trying to steal my fog lights because it looks like someone was cutting a cone shape to get access to my fog lights or something! what else would they want to go under the body of my car????

Pictures.







What is the rubber thing called or can someone point me to the Part # for getting it replaced. Its the rubber thing that goes around your tire from protecting your car from debries or water going inside your bumper or car in general. This is on the right hand side.

[hattrickey]

I'm sorry to hear that man. People are ass holes. Someone tried to steal my 86 center caps. I have huge gouges on the sides where they tried to pry them up with a flat head screw driver.

[914_WHITE_FRS]

Originally Posted by hattrickey

I'm sorry to hear that man. People are ass holes. Someone tried to steal my 86 center caps. I have huge gouges on the sides where they tried to pry them up with a flat head screw driver.

You think what i need to replace is called Front Fender Liner Splash Shield Right

it looks like this picture

this is not the real part for the scion fr-s. just looking around for images.

[Jyn]

Your dealer will be able to order them for you.

If it costs too much there, you may be lucky and find a dirty one at a junk yard or pick-and-pull type place.

[914_WHITE_FRS]

I believe the part # is SU003-01384 its called a Fender Splash Shield, Front Right.


I found this image pic which looks like the complete fender splash shield and the piece on the bottom of it.

[914_WHITE_FRS]

Originally Posted by Jyn

Your dealer will be able to order them for you.

If it costs too much there, you may be lucky and find a dirty one at a junk yard or pick-and-pull type place.

Is it the picture diagram above?

[whataboutbob]

My clips got demolished autoxing and i had the front section fold down while driving and get caught under the tire which caused a large tear in the liner that looks just like yours. Are you running larger wheels/tires than stock? In the first image you posted it looks like there is wear in that inside edge from tire contact...

[914_WHITE_FRS]

Originally Posted by whataboutbob

My clips got demolished autoxing and i had the front section fold down while driving and get caught under the tire which caused a large tear in the liner that looks just like yours. Are you running larger wheels/tires than stock? In the first image you posted it looks like there is wear in that inside edge from tire contact...

My tires/wheels are stock. I have no idea how the heck this happen. But I ordered the Fender Splash Shield Front Right so hopefully there's not another thing I need to replace that goes below the splash shield where it clips to the bottom of the bumper?

[Ammonia]

Could this be from debris? Maybe I'm not looking in the right places but I don't see any cut marks, just torn plastic.

[whataboutbob]

Originally Posted by 914_WHITE_FRS

My tires/wheels are stock. I have no idea how the heck this happen. But I ordered the Fender Splash Shield Front Right so hopefully there's not another thing I need to replace that goes below the splash shield where it clips to the bottom of the bumper?

The fender liner covers the whole wheel well and the corner under the bumper. You need to be sure you've got all of the clips in place to hold it in or you'll probably have the same problem again.

[Jyn]

Originally Posted by 914_WHITE_FRS

Is it the picture diagram above?

Yes. Also, make sure you have the tabs to hold it in place, in case any went missing.

[914_WHITE_FRS]

Originally Posted by Ammonia

Could this be from debris? Maybe I'm not looking in the right places but I don't see any cut marks, just torn plastic.

that was my second suggestion that maybe by driving speed something caught under my splash shield fender and rip it off by the speed effect. My brother thought someone was trying to steal my fog lights and i went back outside to check to see if the fog lights bulbs is there and it is phewww

[914_WHITE_FRS]

Originally Posted by whataboutbob

The fender liner covers the whole wheel well and the corner under the bumper. You need to be sure you've got all of the clips in place to hold it in or you'll probably have the same problem again.

what i ordered was the front fender splash shield which I think it's the same thing? I have all the clips that clip to the bottom of the bumper and the clips that goes to the splash shield is good shape.

[914_WHITE_FRS]

Originally Posted by Jyn

Yes. Also, make sure you have the tabs to hold it in place, in case any went missing.

guess what i went to take a look again and the piece that is hanging I cut it and i found letters on the part it says MUD GUARD and a part# it makes out to be 59110C the last character i believe is a A...