5mm Spacers Longer Studs Needed? - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

F1fletch · 05-12-2014, 02:37 PM

I see a couple vendors sell these and most if not all seem to come with new longer studs. Are they really needed for only 5mm?

wparsons · 05-12-2014, 02:54 PM

The stock studs are barely long enough without spacers, I think most people find 3mm safe but anything more you should get longer studs.

BlueDubbinTDI · 05-12-2014, 03:03 PM

I'll sell you my extended studs

F1fletch · 05-12-2014, 04:10 PM

I take it you didn't use them. Why not?

diss7 · 05-12-2014, 08:35 PM

I tried 5mm spacers on and it was dodgy. Rules over here state you need 6 rotations of the nut on the stud. I barely got three. Not good.

Fizz · 05-13-2014, 05:58 AM

Yes you will need extended studs for 5mm spacer. I've got the 50mm Nismo studs and they're just the right length....long enough to have full lug nut engagement, but not too long to stick out like a sore thumb.

BlueDubbinTDI · 05-13-2014, 08:11 AM

Quote:

Originally Posted by F1fletch

I take it you didn't use them. Why not?

Eh we torqued them down to 71ft lbs and theyve been fine

jflogerzi · 05-13-2014, 10:25 AM

Why not get the bolt on ones?

Sent from my SGH-T999 using Tapatalk

BlueDubbinTDI · 05-13-2014, 11:30 AM

I'll say it again, mine are H&R brand and you can have them for $20 shipped.

05-12-2014, 02:37 PM	#1
F1fletch Senior Member Join Date: Jan 2014 Drives: 13 FR-S AT Location: Mountain House, Ca Posts: 374 Thanks: 67 Thanked 116 Times in 65 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	5mm Spacers Longer Studs Needed? I see a couple vendors sell these and most if not all seem to come with new longer studs. Are they really needed for only 5mm?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
3mm spacer...need longer studs?	Fizz	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	1	04-16-2014 02:50 AM
Spacers and stock wheel studs	solidONE	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	2	08-31-2013 08:55 AM
spacers and stock studs	abutterman	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	9	07-17-2013 10:55 PM
Spacers / Studs VOID Warranty?	N_I_N	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	4	04-30-2013 03:32 PM
Longer wheel studs for those with spacers	000 Racing	AUSTRALIA	0	03-20-2013 06:41 AM

05-12-2014, 03:03 PM	#3
BlueDubbinTDI Senior Member Join Date: Mar 2013 Drives: 2013 FR-S, 2012 MCS Location: Jax, FL Posts: 1,975 Thanks: 943 Thanked 570 Times in 356 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	I'll sell you my extended studs

05-12-2014, 04:10 PM	#4
F1fletch Senior Member Join Date: Jan 2014 Drives: 13 FR-S AT Location: Mountain House, Ca Posts: 374 Thanks: 67 Thanked 116 Times in 65 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	I take it you didn't use them. Why not?

05-12-2014, 08:35 PM	#5
diss7 Banned Join Date: Sep 2012 Drives: AE86, 2x GT86, TE27 Location: Christchurch NZ Posts: 1,478 Thanks: 826 Thanked 1,181 Times in 522 Posts Mentioned: 33 Post(s) Tagged: 0 Thread(s)	I tried 5mm spacers on and it was dodgy. Rules over here state you need 6 rotations of the nut on the stud. I barely got three. Not good.

05-13-2014, 05:58 AM	#6
Fizz Senior Addict Join Date: Jan 2013 Drives: 86 GT Location: Perth, Australia Posts: 1,217 Thanks: 249 Thanked 336 Times in 215 Posts Mentioned: 12 Post(s) Tagged: 0 Thread(s)	Yes you will need extended studs for 5mm spacer. I've got the 50mm Nismo studs and they're just the right length....long enough to have full lug nut engagement, but not too long to stick out like a sore thumb.

05-13-2014, 11:30 AM	#9
BlueDubbinTDI Senior Member Join Date: Mar 2013 Drives: 2013 FR-S, 2012 MCS Location: Jax, FL Posts: 1,975 Thanks: 943 Thanked 570 Times in 356 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	I'll say it again, mine are H&R brand and you can have them for $20 shipped.

User Name		Remember Me?
Password