Front tray/splash shield pushing down due to intercooler? - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Eazy-V · 08-09-2016, 08:48 PM

I have a FBM turbo kit and it seems that the intercooler is pushing down on the black front tray/shield and causing my front bumper with Seibon lip to sag (gaps near the side markers)...anyone else have this issue?

Has anyone removed that tray/shield and whats the purpose of it?

Ultramaroon · 08-09-2016, 11:15 PM

Many many many people have the sag issue. The tray is essential for aero. It wasn't designed to support anything. That's part of the problem.

The other part of the problem is in the design of the bumper cover itself. The unit really needs to be supported from the bottom where your lip is installed. An actual splitter supported by the bumper beam would be perfect.

GsxrMe · 08-09-2016, 11:21 PM

Quote:

Originally Posted by Eazy-V

I have a FBM turbo kit and it seems that the intercooler is pushing down on the black front tray/shield and causing my front bumper with Seibon lip to sag (gaps near the side markers)...anyone else have this issue?

Has anyone removed that tray/shield and whats the purpose of it?

I had to take mine off and cut the tray under it. The easiest way to mark where you need to cut is to just take your bumper off and use tape and go around the radiator where is touching the intercooler. Then take the shield off and cut it. I had to remove about 2 millimeters worth of material going down. I wasn't happy about it at all.

Eazy-V · 08-10-2016, 12:10 AM

Quote:

Originally Posted by Ultramaroon

Many many many people have the sag issue. The tray is essential for aero. It wasn't designed to support anything. That's part of the problem.

The other part of the problem is in the design of the bumper cover itself. The unit really needs to be supported from the bottom where your lip is installed. An actual splitter supported by the bumper beam would be perfect.

It seems to just be a support for the bumper, which I can zip tie and my carbon lip provides extra support.

It doesn't look like an aero/airflow piece, so are you sure?

08-09-2016, 08:48 PM	#1
Eazy-V Senior Member Join Date: Mar 2013 Drives: 2013 Scion FR-S Whiteout Location: Vancouver, BC Posts: 140 Thanks: 9 Thanked 6 Times in 6 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Front tray/splash shield pushing down due to intercooler? I have a FBM turbo kit and it seems that the intercooler is pushing down on the black front tray/shield and causing my front bumper with Seibon lip to sag (gaps near the side markers)...anyone else have this issue? Has anyone removed that tray/shield and whats the purpose of it?

08-09-2016, 11:15 PM	#2
Ultramaroon not playing cards Join Date: Sep 2014 Drives: a 13 e8h frs Location: vantucky, wa Posts: 32,396 Thanks: 53,053 Thanked 37,225 Times in 19,308 Posts Mentioned: 1117 Post(s) Tagged: 9 Thread(s)	Many many many people have the sag issue. The tray is essential for aero. It wasn't designed to support anything. That's part of the problem. The other part of the problem is in the design of the bumper cover itself. The unit really needs to be supported from the bottom where your lip is installed. An actual splitter supported by the bumper beam would be perfect. __________________ service manuals

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
WTB: Front Pipe OEM Heat Shield	Phantobe	Want-To-Buy Requests	0	06-08-2016 07:47 PM
SUBARU TOYOTA BRZ 86 LH FRONT INNER FENDER SPLASH SHIELD LINER 2012-14	impossible	Australia Classifieds	1	09-14-2015 12:40 AM
WTB: Front pipe cat heat shield	Tim_Asphalt_FRS	Engine, Exhaust, Bolt-Ons	4	09-19-2013 01:52 PM
Anyone spray their front splash shield?	swift996	Cosmetic Modification (Interior/Exterior/Lighting)	2	08-20-2013 07:44 PM

User Name		Remember Me?
Password