xcelir8brz's Stock Intake Tube Rubber Delete - Page 5 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

xcelir8brz · 08-01-2012, 07:26 AM

Quote:

Originally Posted by Style

Just bought the drop in HKS filter...where do I begin with this? Eventually I will upgrade to a real one but this will have to do since funds are low.

PM'd you.

And what's the difference of this and the 'real one'. More money for equal or less power?

xcelir8brz · 08-01-2012, 07:26 AM

Quote:

Originally Posted by TBBandit

I guess the real question is.. when i get exhaust, will the twins race?

Only on a track.

xcelir8brz · 08-01-2012, 07:28 AM

Quote:

Originally Posted by TBBandit

ill talk to my guy tomorrow.. maybe if he is in a good mood we can get all the pipes painted before the weekend.. that might be wishful thinking tho

That would be great!

Maybe Glossy Black and one with White Pearl?

xcelir8brz · 08-01-2012, 06:01 PM

Prolly going to do this tonight (paint later)...

Open Air System Intake Parts List:

1-My Extended Custom Finished Pipe w/Grommet
1-Spectre 8791 Black 3" Low Profile 90° Elbow Boot with 2.5" Insert and Band Clamps
1-Spectre 8771 Black Intake Tube Coupler and Band Clamps
1-Spectre 9405 Air Flow Sensor Mount Tube
1-You Pick K&N Air Filter and Custom Bracket

xcelir8brz · 08-01-2012, 09:28 PM

Did some painting tonight. Decided to paint prior to install. What the heck!

Using flat black high temp paint. Provides smooth stock finish and makes the pipe look more stock.

Enjoy!

xcelir8brz · 08-02-2012, 08:05 AM

One short pipe remaining.

Two long pipes remaining.

This was a limited run.

PM with questions.

TBBandit · 08-02-2012, 02:56 PM

Maf came today ...so we r on for Saturday

xcelir8brz · 08-02-2012, 11:03 PM

Good evening everyone.

So I decided that this will be my first and last limited run of making the short stock intake tube delete as well as long tube for cold air intake system. Summer is ending and my availability is limited with work, family, etc. Sorry.

On a happier note, I painted tonight. Actually quite a bit! I used a few different colors with a few different textures. And bottom line, they all turned out great and are very durable. I'm pleased.

I have a couple of colors and configurations set aside for my, as well as TBBandit's R&D cycles this weekend.

Though, I do have a few available to do with whatever and share with you. I have one short black texture and one long black texture both painted. I also have one short and one long both unpainted (either or can be painted per request).

Take a look and let me know your thoughts!

Thanks for the inspiration!

Brian

TBBandit · 08-02-2012, 11:32 PM

I am torn between the reds..but they all look good.

xcelir8brz · 08-03-2012, 05:42 PM

The darker red tube was actually made with a metallic blue base coat and overlaying red on top of that. Looks kind of like the original AEM 'Red' CAI's.

Ready for tomorrow? I am. Excited to get the twins all CAI'd up. And I want to see the look on your face when you hear the intake. It sounds extremely mean and wicked. And honestly, the airbox/heatshield setup we will employ looks really good and extremely functional. Total cost of all DIY parts is near half the price of other systems out there. Even the little guy(s) win.

xcelir8brz · 08-03-2012, 05:44 PM

What filter did you end up getting?

xcelir8brz · 08-03-2012, 05:44 PM

I might (time barring) get a jump on my vehicle tonight. At least to fab out some new brackets.

xcelir8brz · 08-04-2012, 07:53 PM

Fruits of our labor today here: http://www.ft86club.com/forums/showt...679#post359679

xcelir8brz · 08-05-2012, 11:47 AM

Remaining...

1 Short Stock Intake Tube Delete Black Painted
1 Short Stock Intake Tube Delete Unpainted

08-05-2012, 11:47 AM	#70
xcelir8brz Senior Member Join Date: Jun 2012 Drives: 2013 BRZ Limited Location: Earth Posts: 1,029 Thanks: 45 Thanked 235 Times in 157 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	Remaining... 1 Short Stock Intake Tube Delete Black Painted 1 Short Stock Intake Tube Delete Unpainted Last edited by xcelir8brz; 08-05-2012 at 08:47 PM.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Removing and Replacing BRZ/FR-S Intake, Air Filter and Noise Generator Delete	GrimmSpeed	DIY (Do-It-Yourself) Guides	99	01-25-2015 02:24 AM
Dynosty FR-S/BRZ Sound Tube Delete Kit	Dustin@Dynosty	Engine, Exhaust, Bolt-Ons	104	02-11-2014 11:35 AM
86 rubber floormats	denverizzles	Scion FR-S / Toyota 86 GT86 General Forum	30	05-06-2013 06:10 PM
xcelir8brz's - 2013 Subaru BRZ Limited	xcelir8brz	Member's Car Journals	4	06-03-2012 06:44 PM
The intake sound tube	MrVito	Scion FR-S / Toyota 86 GT86 General Forum	8	12-09-2011 08:32 PM

08-01-2012, 06:01 PM	#60
xcelir8brz Senior Member Join Date: Jun 2012 Drives: 2013 BRZ Limited Location: Earth Posts: 1,029 Thanks: 45 Thanked 235 Times in 157 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	Prolly going to do this tonight (paint later)... Open Air System Intake Parts List: 1-My Extended Custom Finished Pipe w/Grommet 1-Spectre 8791 Black 3" Low Profile 90° Elbow Boot with 2.5" Insert and Band Clamps 1-Spectre 8771 Black Intake Tube Coupler and Band Clamps 1-Spectre 9405 Air Flow Sensor Mount Tube 1-You Pick K&N Air Filter and Custom Bracket

08-01-2012, 09:28 PM	#61
xcelir8brz Senior Member Join Date: Jun 2012 Drives: 2013 BRZ Limited Location: Earth Posts: 1,029 Thanks: 45 Thanked 235 Times in 157 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	Did some painting tonight. Decided to paint prior to install. What the heck! Using flat black high temp paint. Provides smooth stock finish and makes the pipe look more stock. Enjoy!

08-02-2012, 08:05 AM	#62
xcelir8brz Senior Member Join Date: Jun 2012 Drives: 2013 BRZ Limited Location: Earth Posts: 1,029 Thanks: 45 Thanked 235 Times in 157 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	One short pipe remaining. Two long pipes remaining. This was a limited run. PM with questions.

08-02-2012, 11:03 PM	#64
xcelir8brz Senior Member Join Date: Jun 2012 Drives: 2013 BRZ Limited Location: Earth Posts: 1,029 Thanks: 45 Thanked 235 Times in 157 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	Good evening everyone. So I decided that this will be my first and last limited run of making the short stock intake tube delete as well as long tube for cold air intake system. Summer is ending and my availability is limited with work, family, etc. Sorry. On a happier note, I painted tonight. Actually quite a bit! I used a few different colors with a few different textures. And bottom line, they all turned out great and are very durable. I'm pleased. I have a couple of colors and configurations set aside for my, as well as TBBandit's R&D cycles this weekend. Though, I do have a few available to do with whatever and share with you. I have one short black texture and one long black texture both painted. I also have one short and one long both unpainted (either or can be painted per request). Take a look and let me know your thoughts! Thanks for the inspiration! Brian

08-03-2012, 05:42 PM	#66
xcelir8brz Senior Member Join Date: Jun 2012 Drives: 2013 BRZ Limited Location: Earth Posts: 1,029 Thanks: 45 Thanked 235 Times in 157 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	The darker red tube was actually made with a metallic blue base coat and overlaying red on top of that. Looks kind of like the original AEM 'Red' CAI's. Ready for tomorrow? I am. Excited to get the twins all CAI'd up. And I want to see the look on your face when you hear the intake. It sounds extremely mean and wicked. And honestly, the airbox/heatshield setup we will employ looks really good and extremely functional. Total cost of all DIY parts is near half the price of other systems out there. Even the little guy(s) win.

08-03-2012, 05:44 PM	#67
xcelir8brz Senior Member Join Date: Jun 2012 Drives: 2013 BRZ Limited Location: Earth Posts: 1,029 Thanks: 45 Thanked 235 Times in 157 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	What filter did you end up getting?

08-04-2012, 07:53 PM	#69
xcelir8brz Senior Member Join Date: Jun 2012 Drives: 2013 BRZ Limited Location: Earth Posts: 1,029 Thanks: 45 Thanked 235 Times in 157 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	Fruits of our labor today here: http://www.ft86club.com/forums/showt...679#post359679

User Name		Remember Me?
Password