Sportsguy's LS2 Swapped BRZ

[Sportsguy83]

Originally Posted by King Tut

Don't make me break out a CHALLENGE ACCEPTED gif, haha. That would be a long drive back home on Sunday.

I really wish you could make it, but man that is a long ass drive!!

[King Tut]

Originally Posted by Sportsguy83

I really wish you could make it, but man that is a long ass drive!!

Yep. Better to wait till dyno day. Don't forget about me.

[Sportsguy83]

Originally Posted by King Tut

Yep. Better to wait till dyno day. Don't forget about me.

No man, I got you.

Sent from my HTC One X using Tapatalk 2

[whitefrs]

Newbie question but im here to learn lol
Do you have instructions on how ro install the perrin mbc

[Sportsguy83]

Originally Posted by whitefrs

Newbie question but im here to learn lol
Do you have instructions on how ro install the perrin mbc

We were all newbies once

http://www.perrinperformance.com/sha.../asmint700.pdf

[whitefrs]

Originally Posted by Sportsguy83

We were all newbies once

http://www.perrinperformance.com/sha.../asmint700.pdf

Thanks man
I got the instructions but i just dont get it cuz there is a hose that goes from wastegate but no hose on turbo housing
I got the fbm with gt28

[Sportsguy83]

Originally Posted by whitefrs

Thanks man
I got the instructions but i just dont get it cuz there is a hose that goes from wastegate but no hose on turbo housing
I got the fbm with gt28

Ahh... I tought that may have been what you meant

By any chance, do you have a pic of your turbo and wastegate?

Does your wastegate have two ports?

[whitefrs]

Originally Posted by Sportsguy83

Ahh... I tought that may have been what you meant

By any chance, do you have a pic of your turbo and wastegate?

Does your wastegate have two ports?

V

[whitefrs]

Originally Posted by Sportsguy83

Ahh... I tought that may have been what you meant

By any chance, do you have a pic of your turbo and wastegate?

Does your wastegate have two ports?

I dont man

[Sportsguy83]

Originally Posted by whitefrs

I dont man

Ok. Quickly looking at the specs in their site and pictures, it seems they use a WG that dumps to atmosphere and if I remember correctly @King Tut told me theres an option to recirculate the dump (this is besides the point).

So, if your compressor housing does not have a port for PSI signal, you would have to use the vaccum/boost signal you used for your gauge and BOV. If you used a vacuum manifold its easier because you don't need to cut more hoses, just use one of the available ports.

So the pressure signal will come from whatever source of vacuum you used for gauge/BOV, and your input into the Wastegate should be on the bottom side of the WG actuator (WG that dump to atmosphere usually use the top port for measuring ambient pressure and bottom for signal to actuate). Does this make sense to you??

[King Tut]

Originally Posted by whitefrs

Newbie question but im here to learn lol
Do you have instructions on how ro install the perrin mbc

You should have a Precision wastegate. You will leave the top port on the wastegate open and you put the Perrin MBC inline on the vacuum line that goes to the port on the side of the wastegate. Basically all you have to do is find that vacuum line, cut it, and put the Perrin MBC inline.

[whitefrs]

My friend told me to cut the wastegate hose and just add it in between
But not sure

[whitefrs]

Originally Posted by King Tut

You should have a Precision wastegate. You will leave the top port on the wastegate open and you put the Perrin MBC inline on the vacuum line that goes to the port on the side of the wastegate. Basically all you have to do is find that vacuum line, cut it, and put the Perrin MBC inline.

Lol u win me to it lol
Do you have any pic of urs?

[killerkid08]

Originally Posted by lbroskee

maybe it's been corrected but last i heard it doesnt even fit right. u need to mod the plastic engine cover, which is just plain ridiculous

Not at all. Think of all the modifications we do and now we can't cut a little out of a some stuff you can't even see!?!?!

Be for real.