Perrin Catback Exhaust Installation and Review! - Page 16 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Simmons · 04-26-2013, 08:54 PM

Quote:

Originally Posted by WRXGuy1

Love it! Where's the best place to order it from?

JSCSpeed.com

Simmons

Sony · 04-26-2013, 10:54 PM

Quote:

Originally Posted by WRXGuy1

Love it! Where's the best place to order it from?

I ordered through Kaizen but you can order directly through Perrin as well.

-Sony

tonystewart · 04-27-2013, 07:05 AM

Circuit

Sensisnow · 05-03-2013, 01:22 AM

Looking from the back of the car, my left tip extends about an inch further than the right one, which is almost flush with the bumper. I tried aligning it with the bushing tools, but that did nothing. I'm guessing I need to adjust the s-clamps somewhere? Any tips?

Apoc · 05-03-2013, 02:11 AM

I would loosen the vband clamps and try to rotate the midpipe a bit. That worked for me.

EvoXDD · 05-03-2013, 01:00 PM

Quote:

Originally Posted by Sensisnow

Looking from the back of the car, my left tip extends about an inch further than the right one, which is almost flush with the bumper. I tried aligning it with the bushing tools, but that did nothing. I'm guessing I need to adjust the s-clamps somewhere? Any tips?

Mine is the same. No one but me notice though. After the down pipe was put on there was no getting it perfect. But yeah it is something only I notice cause it is my car.

Sensisnow · 05-03-2013, 01:31 PM

Quote:

Originally Posted by Apoc

I would loosen the vband clamps and try to rotate the midpipe a bit. That worked for me.

Thanks, I'll give that a try this weekend.

PERRIN_Mladen · 05-03-2013, 02:06 PM

Quote:

Originally Posted by Sensisnow

Looking from the back of the car, my left tip extends about an inch further than the right one, which is almost flush with the bumper. I tried aligning it with the bushing tools, but that did nothing. I'm guessing I need to adjust the s-clamps somewhere? Any tips?

You can fix this by loosening the V-band at the muffler and the S pipe. But do not loosen it too much, just enough to where you can twist the S-pipe a little. Take a look at the tips and twist the S-pipe, you will see the tips move in and out as you rotate it. Move it into place and snug down the muffler, V-band first, then the S pipe one.

That should allow it to work perfect.

quicksilver30 · 05-08-2013, 11:23 AM

Do I need a torque wrench for this install? My exhaust is shipping this week and I want to make sure I have all the tools necessary.

tennisfreak · 05-08-2013, 11:45 AM

Yes you need a torque wrench. One that can go as low as 75 inch pounds if I recall correctly.

quicksilver30 · 05-08-2013, 12:14 PM

Quote:

Originally Posted by tennisfreak

Yes you need a torque wrench. One that can go as low as 75 inch pounds if I recall correctly.

Sensisnow · 05-08-2013, 03:07 PM

Quote:

Originally Posted by quicksilver30

Do I need a torque wrench for this install? My exhaust is shipping this week and I want to make sure I have all the tools necessary.

It would be nice to have a torque wrench, but I wouldn't consider it a necessary item for this installation. I have one, but only used it on the larger bolts for this install because I didn't have a deep socket for the v-band bolts that would fit my 1/2" torque wrench and everything works fine with no leaks.

Oburn · 05-12-2013, 11:12 PM

Anyone know any CanAdian sites that sell perrin cat back exhaust?

Efferalgan · 05-13-2013, 04:17 AM

Does anyone know the actual weight of both resonated and non-resonataed versions? It's indicated as 39.5lbs for both on the official web site.

At the same time last year DSport magazine weighted the version w/o resonator and got 29.2 lbs - the question appears: did they get some special improved "press" version or what? The resonated version was 33.6 lbs according to DSport - so, does resonator weight 4.4 pounds?

04-27-2013, 07:05 AM	#213
tonystewart Senior Member Join Date: May 2012 Drives: 2013 Scion FR-S Raven Location: Lake Worth Florida Posts: 1,182 Thanks: 76 Thanked 373 Times in 253 Posts Mentioned: 13 Post(s) Tagged: 1 Thread(s)	Circuit __________________ May'12 AT Raven, OFT V2, Perrin IntakeTube, Pulley & Overpipe,HKS Snorkel,FA20 EL Header,Nameless Frontpipe w/ Helmholtz, Crawford AOS, Cusco O2W Cooler, Grimmspeed Strut/MC Brace, Winjets w/D2S 3.0 HID by Illuminating Lighworkx, Fogs w/EU Stalk, LED's, JDM UnderPanels, Diffuser, Rigid Collars, Whiteline, HVT Camber Plates, Koni's, Swift Springs, GTSpec LCA, SPC Toearms, DBA 4K T-Slot Rotors, Ferodo DS2500, Vorshlag BrakeLines, MichelinPSS, 5Axis Wing, Raammat, Ensolite, JPM Coachworks, OEM+Ref400, 20mmspacers, TOMS

05-03-2013, 02:11 AM	#215
Apoc Senior Member Join Date: Jul 2012 Drives: Raven FR-S 6M Location: Calgary, Canada Posts: 638 Thanks: 348 Thanked 375 Times in 232 Posts Mentioned: 3 Post(s) Tagged: 1 Thread(s)	I would loosen the vband clamps and try to rotate the midpipe a bit. That worked for me. __________________ “The World is Flat” [\|\|•]=(86)=[•\|\|]

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Perrin Catback Exhaust vs Nameless Performance Exhaust.	vignesh	Engine, Exhaust, Transmission	201	06-05-2013 10:47 PM
NEW! Perrin SS Catback Exhaust System Up to +9rwhp \| In-Stock\| FREE S&H!	AJ@ECSMotorsports	Engine, Exhaust, Bolt-Ons	31	04-06-2013 10:05 AM
Review of ISIS Street Catback exhaust	sirhc	Engine, Exhaust, Transmission	24	10-29-2012 05:57 AM

05-08-2013, 11:23 AM	#219
quicksilver30 Member Join Date: Sep 2012 Drives: '13 LR BRZ Limited\| '07 Jeep GC Location: Ohio Posts: 56 Thanks: 22 Thanked 22 Times in 16 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Do I need a torque wrench for this install? My exhaust is shipping this week and I want to make sure I have all the tools necessary.

05-12-2013, 11:12 PM	#223
Oburn Member Join Date: May 2013 Drives: 2013 Subaru BRZ Location: St. John's Newfoundland Posts: 76 Thanks: 26 Thanked 8 Times in 8 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Anyone know any CanAdian sites that sell perrin cat back exhaust?

05-13-2013, 04:17 AM	#224
Efferalgan Senior Member Join Date: Sep 2012 Drives: 2025 BRZ, ex-2012 GT86 Location: Dubai Posts: 466 Thanks: 422 Thanked 234 Times in 139 Posts Mentioned: 5 Post(s) Tagged: 0 Thread(s)	Does anyone know the actual weight of both resonated and non-resonataed versions? It's indicated as 39.5lbs for both on the official web site. At the same time last year DSport magazine weighted the version w/o resonator and got 29.2 lbs - the question appears: did they get some special improved "press" version or what? The resonated version was 33.6 lbs according to DSport - so, does resonator weight 4.4 pounds?

User Name		Remember Me?
Password