Mid-Atlantic Chat Thread - Page 98 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

OrbitalEllipses · 03-28-2013, 02:53 PM

Quote:

Originally Posted by civicdrivr

The headlights have my attention though, I'm curious what housing they're using. Have pictures been released?

Edit- Took a look at the website on my phone. Hard to tell what the headlights look like with such a small picture.

Sent from my Nexus 4

Pretty sure illuminating the badges (if they ARE blue) is illegal while a) driving and b) period because only emergency vehicles are allowed to have blue lights.

swift996 · 03-28-2013, 03:01 PM

Does anyone know anyone who would have the capability to machine down these center caps? I need about 1-1.5mm taken off. I'm guessing they could be machined but I have no idea if I should try a machine shop or a fabricator.

IloveBaldEagles · 03-28-2013, 03:20 PM

Quote:

Originally Posted by OrbitalEllipses

Pretty sure illuminating the badges (if they ARE blue) is illegal while a) driving and b) period because only emergency vehicles are allowed to have blue lights.

If they are like the XB hot lava release then they illuminate for a few seconds when you lock and unlock the car. Pretty much function like interior dome lights except you can't have them on for a long time.

ScurrilousKnave · 03-28-2013, 03:29 PM

Quote:

Originally Posted by OrbitalEllipses

Pretty sure illuminating the badges (if they ARE blue) is illegal while a) driving and b) period because only emergency vehicles are allowed to have blue lights.

I'm pretty sure I read somewhere (in the main thread here or on another site covery the NYAS) that they only illuminate when the car is unlocked and fade after several seconds.

EDIT: Ah, beaten to it!

civicdrivr · 03-28-2013, 03:37 PM

Quote:

Originally Posted by Sekal

If Nigel is selling the pair for ~$1200, I can probably get a set for less if the prices match.

I thought he was selling them for $2k for the pair? Either way, let me know what the cost of them are. I'm bored with the stock housings.

Sent from my Nexus 4

camelflage · 03-28-2013, 03:47 PM

Quote:

Originally Posted by swift996

Does anyone know anyone who would have the capability to machine down these center caps? I need about 1-1.5mm taken off. I'm guessing they could be machined but I have no idea if I should try a machine shop or a fabricator.

[]http://i271.photobucket.com/albums/jj153/swiftrx8/B63EB3C7-9ED7-477D-A7DB-5F8B25FAD0E9-10505-0000032B3349694A_zps3accd7f5.jpg?t=1364419916[]

just call BBS and get the correct size for your wheel.. trying to shave a millimeter off those will probably end up ruining them..

kanundrum · 03-28-2013, 04:00 PM

swift996 · 03-28-2013, 04:07 PM

Quote:

Originally Posted by camelflage

just call BBS and get the correct size for your wheel.. trying to shave a millimeter off those will probably end up ruining them..

The problem is they don't make or stock these so they are terribly hard to get a hold of. It took me 2.5 months to get these that were suppose to be the 70mm face ones. They measure about 73-74mm.

Darryljr11 · 03-28-2013, 04:28 PM

Quote:

Originally Posted by kanundrum

Im pretty sure i saw this man and woman walking in front of the professional building at washington adventist hospital yesterday around 10am.

camelflage · 03-28-2013, 04:29 PM

Quote:

Originally Posted by swift996

The problem is they don't make or stock these so they are terribly hard to get a hold of. It took me 2.5 months to get these that were suppose to be the 70mm face ones. They measure about 73-74mm.

huh, well that sucks. if its an acrylic piece, however you end up shaving down the edge you will need to polish afterwards. and hopefully its a solid color and not painted on top of like white plastic..

really i dont know who would agree to cut on that for you that would also guarantee not to fuck it up.. maybe you could put some cardboard over the wheel, trace it out, make a template from that and use it as a guide for dremel-ing around the outer edge..

kanundrum · 03-28-2013, 04:34 PM

Quote:

Originally Posted by Darryljr11

Im pretty sure i saw this man and woman walking in front of the professional building at washington adventist hospital yesterday around 10am.

All aasians dont look alike man! haha jk but for real if you think it then call ?

Darryljr11 · 03-28-2013, 04:37 PM

Quote:

Originally Posted by kanundrum

All aasians dont look alike man! haha jk but for real if you think it then call ?

Lol i dont think that but the man was wearing the same coat.

kanundrum · 03-28-2013, 04:38 PM

Quote:

Originally Posted by Darryljr11

Lol i dont think that but the man was wearing the same coat.

Seriously though call the number listed? never know you could be a Hero

frslee · 03-28-2013, 04:45 PM

Are they from Laurel? It'd be better to know their residence city. If they were walking, they wouldn't go too far from where they live... Hope they are safe.

03-28-2013, 03:01 PM	#1360
swift996 Senior Member Join Date: Nov 2011 Drives: Subaru BRZ Limited 6MT Location: Winston-Salem, NC Posts: 2,432 Thanks: 712 Thanked 955 Times in 545 Posts Mentioned: 47 Post(s) Tagged: 0 Thread(s)	Does anyone know anyone who would have the capability to machine down these center caps? I need about 1-1.5mm taken off. I'm guessing they could be machined but I have no idea if I should try a machine shop or a fabricator. __________________ Innovate Supercharged Black Limited BRZ 6-Speed MT(Build Thread) 2010 Cadillac CTS-V Sedan M6 w/550whp (Build Thread)

03-28-2013, 04:00 PM	#1365
kanundrum Senior Member Join Date: Jan 2012 Drives: 2013 Whiteout FR-S Location: Laurel, MD Posts: 5,364 Thanks: 2,704 Thanked 3,016 Times in 1,711 Posts Mentioned: 106 Post(s) Tagged: 3 Thread(s)	__________________ Ive spent most of my life racing... The rest I just wasted

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Mid-Atlantic spotting thread	OMNOM	Mid-Atlantic	7404	08-27-2021 09:30 PM
Chat Vancouver FR-S/BRZ Members Mumbo Jumbo Thread	peazs	CANADA	1397	06-28-2019 01:17 PM
Its The Mid Week Chat!	vividracing	Off-Topic Lounge [WARNING: NO POLITICS]	17	07-09-2012 02:31 AM
#ft86club chat room	ayau	Off-Topic Lounge [WARNING: NO POLITICS]	1	03-02-2012 11:53 PM
FT86Club IIRC Chat	Zaku	Off-Topic Lounge [WARNING: NO POLITICS]	2	12-12-2011 10:36 PM

03-28-2013, 04:45 PM	#1372
frslee Just drive it Join Date: Mar 2013 Drives: 13' FR-S Location: Maryland Posts: 1,122 Thanks: 97 Thanked 321 Times in 218 Posts Mentioned: 10 Post(s) Tagged: 3 Thread(s)	Are they from Laurel? It'd be better to know their residence city. If they were walking, they wouldn't go too far from where they live... Hope they are safe.

User Name		Remember Me?
Password