Pics of new armrest accessory in development. - Page 5 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

DjDATZ · 09-19-2012, 02:16 PM

Impressive! Would definitely consider buying this depending on how exactly it works and whether or not it's removable!

jstans84 · 09-19-2012, 02:31 PM

Quote:

Originally Posted by colHolm

Any particular reason some people don't like the idea of drilling into the console to install? The more feedback I can give, the better for all of us!

If some reason ever came up where I wanted to remove the armrest there would be ghastly holes in the console. Now if the armrest was designed so that it fit inside the cup holder and you could just take it out if needed that would be perfect.

civicdrivr · 09-19-2012, 02:35 PM

Quote:

Originally Posted by jstans84

If some reason ever came up where I wanted to remove the armrest there would be ghastly holes in the console. Now if the armrest was designed so that it fit inside the cup holder and you could just take it out if needed that would be perfect.

zoomzoomers · 09-19-2012, 02:38 PM

So is this the factory model you're testing? I've heard that Scion would be offereing one as a dealer option sometimes 4th quarter. Or is this an independent company?

colHolm · 09-19-2012, 02:44 PM

Well, it's not quite factory... but it is OEM. I'm testing out this part (and some others) for Scion Canada and they were ok with me posting up here to get some feedback when I suggested it.

CircuitJerk · 09-19-2012, 02:47 PM

A rear hinge with a slider in the cover so you can tilt it up and slide down beind the console could be a good consideration but add quite a bit to design and cost to the end user. Not sure how doable that would be.

whaap · 09-19-2012, 02:48 PM

Quote:

Originally Posted by deucethemoose

So in order to use this I have to screw into my console?

I don't think so. It looks to me like there's a completely new console assembly allowing for the hinges and the closing clasp. It will be a pricey accessory. I am not the inventive type but I'll bet some clever individual can come up with a design that would use the existing console. One idea might simply be velcro attached and when you want to use the cup holders, put the arm rest in the back seat or back seat floor. I for one don't drink or eat in my car.

VenomRush · 09-19-2012, 02:54 PM

great looking accessory/ad on

deucethemoose · 09-19-2012, 02:56 PM

Quote:

Originally Posted by whaap

I don't think so. It looks to me like there's a completely new console assembly allowing for the hinges and the closing clasp. It will be a pricey accessory. I am not the inventive type but I'll bet some clever individual can come up with a design that would use the existing console. One idea might simply be velcro attached and when you want to use the cup holders, put the arm rest in the back seat or back seat floor. I for one don't drink or eat in my car.

I have notated the screws for you.

whaap · 09-19-2012, 02:59 PM

Quote:

Originally Posted by deucethemoose

I have notated the screws for you.

Good job. I'll take one.

jchall30 · 09-19-2012, 03:03 PM

I'd love the accessory if it doesn't break the bank. Looks much nicer than the stock console. Why couldn't the armrest flip back instead of to the side so both passengers could use the cup holders?

colHolm · 09-19-2012, 03:05 PM

If I knew this thread would get so much attention, I would have cleaned the underside of the armrest! Oops.

samfrs · 09-19-2012, 03:15 PM

looks awesome

no price set yet?

DaJo · 09-19-2012, 03:19 PM

Nice little upgrade. I would take one too if price is reasonable.

Also a few suggestions; like some have already mentioned, they would have a lot more people interested if they can implement the following:

a small slot for the power outlet (so wire can thread through for accessories),
a sliding mechanism so the armrest slides back instead of flipping.
a magnet that attaches the base to the console rather than having to drill for installation.

Just my 2 cents, but I would really like to see these on the final product.

09-19-2012, 02:38 PM	#60
zoomzoomers Senior Member Join Date: Nov 2011 Drives: 2013 Subaru SWP BRZ Limited 6AT Location: Darkside Posts: 1,862 Thanks: 526 Thanked 305 Times in 207 Posts Mentioned: 9 Post(s) Tagged: 0 Thread(s)	So is this the factory model you're testing? I've heard that Scion would be offereing one as a dealer option sometimes 4th quarter. Or is this an independent company? __________________ Man Law#17:A man in the company of a hot, seductively dressed, woman MUST remain sober enough to fight! MODS: AVO tubes + filter, Cusco (F) strut brace w/ MC brace, Perrin CBE, Subaru OEM trunk tray, Grimmspeed front license re-locator & hood struts and Beatsonic rear cam.

09-19-2012, 03:19 PM	#70
DaJo FT86Club Vancouver Join Date: Jun 2012 Drives: BRZ Sport-Tech; Drove: MR-S, AE86 Location: Vancouver, BC Posts: 2,533 Thanks: 391 Thanked 1,180 Times in 634 Posts Mentioned: 16 Post(s) Tagged: 2 Thread(s)	Nice little upgrade. I would take one too if price is reasonable. Also a few suggestions; like some have already mentioned, they would have a lot more people interested if they can implement the following: a small slot for the power outlet (so wire can thread through for accessories), a sliding mechanism so the armrest slides back instead of flipping. a magnet that attaches the base to the console rather than having to drill for installation. Just my 2 cents, but I would really like to see these on the final product. __________________ 1984 AE86 BT 20V 5MT 2007-2012 2000 MR-S 5MT 2010-2012 2013 BRZ Sport-Tech 6AT Since '12 (OEM+ STI tS Build) 2015 Lexus IS250 AWD F-Sport 2 2015-2018 2018 Lexus NX300 F-Sport 3 Since '18

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Another DIY Armrest	greighn	DIY (Do-It-Yourself) Guides	8	06-06-2013 03:26 PM
JDM Center Armrest	K2	Scion FR-S / Toyota 86 GT86 General Forum	49	10-09-2012 01:08 AM
armrest!!!	whitefrs	Cosmetic Modification (Interior/Exterior/Lighting)	10	09-07-2012 04:16 PM
DIY Center Armrest	BRZranger	Cosmetic Modification (Interior/Exterior/Lighting)	6	07-19-2012 12:04 PM
Armrest?!	Abflug	Scion FR-S / Toyota 86 GT86 General Forum	59	04-03-2012 02:42 PM

09-19-2012, 02:44 PM	#61
colHolm Default User Title Join Date: Mar 2011 Drives: FR-S Location: Whitby, ON Posts: 688 Thanks: 182 Thanked 349 Times in 118 Posts Mentioned: 6 Post(s) Tagged: 0 Thread(s)	Well, it's not quite factory... but it is OEM. I'm testing out this part (and some others) for Scion Canada and they were ok with me posting up here to get some feedback when I suggested it.

09-19-2012, 02:47 PM	#62
CircuitJerk Pull my finger... Join Date: Dec 2011 Drives: Silver Scion Slushbox Location: Illinois Posts: 996 Thanks: 476 Thanked 367 Times in 226 Posts Mentioned: 26 Post(s) Tagged: 0 Thread(s)	A rear hinge with a slider in the cover so you can tilt it up and slide down beind the console could be a good consideration but add quite a bit to design and cost to the end user. Not sure how doable that would be.

09-19-2012, 02:54 PM	#64
VenomRush Thee O-ri-gi-na-tor Join Date: Oct 2009 Drives: 2013 FR-S Location: So Cal Posts: 948 Thanks: 59 Thanked 80 Times in 46 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	great looking accessory/ad on

09-19-2012, 03:03 PM	#67
jchall30 Senior Member Join Date: Sep 2012 Drives: 2014 Whiteout Monogram FRS Location: Winchester, KY Posts: 126 Thanks: 3 Thanked 11 Times in 11 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	I'd love the accessory if it doesn't break the bank. Looks much nicer than the stock console. Why couldn't the armrest flip back instead of to the side so both passengers could use the cup holders?

09-19-2012, 03:05 PM	#68
colHolm Default User Title Join Date: Mar 2011 Drives: FR-S Location: Whitby, ON Posts: 688 Thanks: 182 Thanked 349 Times in 118 Posts Mentioned: 6 Post(s) Tagged: 0 Thread(s)	If I knew this thread would get so much attention, I would have cleaned the underside of the armrest! Oops.

09-19-2012, 03:15 PM	#69
samfrs Custom User Title Join Date: Aug 2012 Drives: FRS Location: Raven Posts: 73 Thanks: 5 Thanked 9 Times in 9 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	looks awesome no price set yet?

User Name		Remember Me?
Password