Throw out bearing? - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

CelicaJoe · 03-25-2026, 01:21 AM

Back in 2018 at about 98k miles my throw out bearing failed. From what I remember, white smoke coming out of the hood, real bad and loud grinding noises. I’m guessing the transmission shop replaced with an OEM tob, but I wasn’t even thinking about it at the time. Fast forward to now with 155k miles, my car sat for 3 weeks while I was out of town and when I drove it when I got back 2 weeks ago I noticed a humming, almost light hissing, noise when the clutch is pressed lightly or engaged. Noise goes away when not touching the pedal, and doesnt happen when I touch the pedal in idle.
Guessing it’s the tob? But what’s odd is the noise is only there half the time when I’m driving, not every time. Is this just early stage failure and the noise will likely continue to worsen until it fails? Also does anyone know roughly
how much time you usually have before it’s really gotta be changed? Thinking about tackling it myself but it’s been quite a while since I’ve done a job near that big before, and just have my garage space to try.

Any help is super appreciated!

Spuds · 03-25-2026, 09:39 AM

I caught mine early and the first sign was a whistling noise like a turbo BOV when the clutch pedal was pressed. It just started one morning and was extremely consistent for the 5 minutes it took to turn around and bring it home. Replacing the TOB fixed it.

ZC6_STi · 03-25-2026, 06:09 PM

Better to replace the TOB as soon as possible rather than wait for it. It IS a big project for most people who want to tackle it for the first time, but it's fairly an easy/intermediate job if you know what you're doing. There are several YouTube videos for tutorials on doing the TOB/Clutch replacement.

You may want to pick up a transmission jack from Harbor Freight if you want to DIY, but if you have someone who can help you take out the transmission, it won't be necessary. Below is the link to do the Clutch/TOB replacement.

https://www.ft86club.com/forums/showthread.php?t=25054

Also, if you want to spend a little more on the TOB, I would suggest getting the Battle Garage TOB if you want longevity. It's $200+ BGRS TOB vs. $80+ OEM TOB.

https://shop.battlegarage-rs.com/pro...earing-upgrade

Spuds · 03-28-2026, 11:21 PM

Or get a PDM TSK. Super smooth actuation without having to replace the snout itself. Replacement bearings are expensive because dumb reasons, but there's always a trade off.

smackrel · 03-30-2026, 11:03 AM

Great information in the last 2 replies, Thanks guys!

03-25-2026, 01:21 AM	#1
CelicaJoe Senior Member Join Date: Jun 2015 Drives: 2013 BRZ Location: Florida Posts: 132 Thanks: 46 Thanked 98 Times in 41 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Throw out bearing? Back in 2018 at about 98k miles my throw out bearing failed. From what I remember, white smoke coming out of the hood, real bad and loud grinding noises. I’m guessing the transmission shop replaced with an OEM tob, but I wasn’t even thinking about it at the time. Fast forward to now with 155k miles, my car sat for 3 weeks while I was out of town and when I drove it when I got back 2 weeks ago I noticed a humming, almost light hissing, noise when the clutch is pressed lightly or engaged. Noise goes away when not touching the pedal, and doesnt happen when I touch the pedal in idle. Guessing it’s the tob? But what’s odd is the noise is only there half the time when I’m driving, not every time. Is this just early stage failure and the noise will likely continue to worsen until it fails? Also does anyone know roughly how much time you usually have before it’s really gotta be changed? Thinking about tackling it myself but it’s been quite a while since I’ve done a job near that big before, and just have my garage space to try. Any help is super appreciated!

03-25-2026, 09:39 AM	#2
Spuds The Dictater Join Date: Apr 2017 Drives: '13 Red Scion FRS Location: MD, USA Posts: 9,676 Thanks: 26,731 Thanked 12,735 Times in 6,310 Posts Mentioned: 88 Post(s) Tagged: 0 Thread(s)	I caught mine early and the first sign was a whistling noise like a turbo BOV when the clutch pedal was pressed. It just started one morning and was extremely consistent for the 5 minutes it took to turn around and bring it home. Replacing the TOB fixed it. __________________ If a picture is worth a thousand words, a model is worth ten thousand pictures. Also: "Build Thread"

03-28-2026, 11:21 PM	#4
Spuds The Dictater Join Date: Apr 2017 Drives: '13 Red Scion FRS Location: MD, USA Posts: 9,676 Thanks: 26,731 Thanked 12,735 Times in 6,310 Posts Mentioned: 88 Post(s) Tagged: 0 Thread(s)	Or get a PDM TSK. Super smooth actuation without having to replace the snout itself. Replacement bearings are expensive because dumb reasons, but there's always a trade off. __________________ If a picture is worth a thousand words, a model is worth ten thousand pictures. Also: "Build Thread"

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Melted Throw Out Bearing	danthedirt	Issues \| Warranty \| Recalls / TSB	59	01-25-2018 05:32 PM
Throw-out bearing	mhigham	Issues \| Warranty \| Recalls / TSB	71	08-18-2016 10:21 AM
throw out bearing clips...	Shit Luck	Engine, Exhaust, Transmission	0	04-12-2014 06:34 PM
FS: NJ O.E.M. Clutch, flywheel, throw out bearing	Michaeljp92	Transmission and Driveline	9	02-03-2014 11:42 PM
Throw out bearing/Left Front speaker/Paint Chips	2014scionfrs	Issues \| Warranty \| Recalls / TSB	11	01-06-2014 11:20 AM

03-25-2026, 06:09 PM	#3
ZC6_STi Member Join Date: Oct 2014 Drives: 2015 Subaru BRZ Series.Blue #709 Location: Los Angeles, CA Posts: 93 Thanks: 47 Thanked 61 Times in 36 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Better to replace the TOB as soon as possible rather than wait for it. It IS a big project for most people who want to tackle it for the first time, but it's fairly an easy/intermediate job if you know what you're doing. There are several YouTube videos for tutorials on doing the TOB/Clutch replacement. You may want to pick up a transmission jack from Harbor Freight if you want to DIY, but if you have someone who can help you take out the transmission, it won't be necessary. Below is the link to do the Clutch/TOB replacement. https://www.ft86club.com/forums/showthread.php?t=25054 Also, if you want to spend a little more on the TOB, I would suggest getting the Battle Garage TOB if you want longevity. It's $200+ BGRS TOB vs. $80+ OEM TOB. https://shop.battlegarage-rs.com/pro...earing-upgrade

03-30-2026, 11:03 AM	#5
smackrel Full Throttle! Join Date: Nov 2021 Drives: 17 CBSP Limited PP Location: TPA Posts: 107 Thanks: 82 Thanked 37 Times in 31 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Great information in the last 2 replies, Thanks guys!

User Name		Remember Me?
Password