STX setup sharing thread (2021)

[gordo52]

SPC are the press it out variety.

[MX-5RACER]

Originally Posted by Autoxer62

Looking at the pile of parts, before I mess something up I've got a question on the Diftech bushings for the SPC control arms:

Are these the "burn out the rubber and leave the shell behind" kind?
Or the "press out the whole shell plus bushing" kind?

Most of the poly bushings I've dealt with are the "burn out" kind, thus the question.

Is it even necessary to swap out the bushings any longer? I thought there was an allowance in a past FasTrack that allowed these lower control arms without swapping the bushings. I found it in the November FasTrack, item 12) #30319 14.8.B Bushing allowances.

[strat61caster]

Originally Posted by MX-5RACER

Is it even necessary to swap out the bushings any longer? I thought there was an allowance in a past FasTrack that allowed these lower control arms without swapping the bushings. I found it in the November FasTrack, item 12) #30319 14.8.B Bushing allowances.

The spc is a ball and socket which is still not allowed per the proposed wording.