|
||||||
| Issues | Warranty | Recalls / TSB Problems, issues, recalls, TSBs |
![]() |
|
|
Thread Tools | Search this Thread |
|
|
#1 |
|
Member
Join Date: May 2017
Drives: BRZ, E90 M3
Location: San Francisco, CA
Posts: 50
Thanks: 3
Thanked 8 Times in 5 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
P0303 - Engine Struggling and Rumbling
Hi! Need some help with a returning P0303.
Some historical events - My 13 BRZ (2015 FA20 swapped) threw a P0303 last month and I took action by replacing the spark plugs and the coil. Both plugs and the coil are OEM from a Subaru parts center. Did the job and reset the code. Everything was great, I even got an MPG improvement. Drove 300 miles and still great. Today - Went to Laguna Seca to do a track day and my first two sessions went well. During my third session, the car started to have a distinct rumbling exhaust note, power loss, and blinking CEL. Pulled into the paddock, turned off the car, and checked for the code. Code was P0303. I decided to pack up and leave. I cleared the code before leaving. On the way back home, the symptoms came back and it struggling. At times the issues were intermittent, it was struggling/bogging and then things feel fine for a very short time, within seconds. Then goes back to the struggling, bogging, power loss, blinking CEL, and rumbling exhaust note. I'm starting to think that cylinder 3's injector is bad. Not totally sure though and I don't want to start chasing a problem blindly. I did some data logging on my OFT v2, but I have no clue how to read it. Here is my data log: https://drive.google.com/file/d/1jPV...ew?usp=sharing --- Relevant aftermarket parts for the P0303. JDL Catted UEL Stage 2 OFT OTS Tune Tanabe Over Pipe Tanabe Front Pipe GReddy SP Elite Cat Back Would love to get some insight from my fellow 86 owners. |
|
|
|
|
|
#2 |
|
Senior Member
Join Date: Feb 2018
Drives: '14
Location: Midwest
Posts: 485
Thanks: 246
Thanked 99 Times in 76 Posts
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
|
https://datazap.me/u/kev0/hachigoku?...ta=3-4-6-10-11
In the future, upload your .csv files onto Datazap for better readibility |
|
|
|
|
|
#3 |
|
Member
Join Date: May 2017
Drives: BRZ, E90 M3
Location: San Francisco, CA
Posts: 50
Thanks: 3
Thanked 8 Times in 5 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Oh this awesome, thank you!
|
|
|
|
|
|
#4 |
|
Senior Member
Join Date: May 2013
Drives: 2013 FR-S, white, MT
Location: Puyallup, WA
Posts: 30,432
Thanks: 29,826
Thanked 32,845 Times in 16,844 Posts
Mentioned: 715 Post(s)
Tagged: 2 Thread(s)
|
|
|
|
|
|
|
#5 |
|
Member
Join Date: May 2017
Drives: BRZ, E90 M3
Location: San Francisco, CA
Posts: 50
Thanks: 3
Thanked 8 Times in 5 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Resolved it. Coil died. Swapped it and I'm back on. I think I'm going to get some upgraded coils for the next track day.
|
|
|
|
| The Following 3 Users Say Thank You to hachigoku For This Useful Post: |
|
|
#6 |
|
Senior Member
Join Date: May 2012
Drives: 2013 Series 10 6MT FR-S
Location: Moreno Valley, CA
Posts: 5,565
Thanks: 2,013
Thanked 2,043 Times in 1,474 Posts
Mentioned: 72 Post(s)
Tagged: 0 Thread(s)
|
Do you have the new style coils or old style? I keep killing the front passenger side one on track at the very tippy top of 4th I will throw the P0301 code. Hood vents could help as its heat that's kills the coils. Also I would take the part back to the dealer and get a new one. Might have been defective.
__________________
2013 Series 10 FRS #553
RCE T2's, SPC LCAs -4/2.6 camber JDL 4-2-1 EL, FP and OP, Tuned by Zach@CSG on e85 RR Wilwood Front/Rear Sport BBK, Motul 600 Fluid ARC-8 17x9 SX2 GTs 245s/Koing 17x8 v730's 225's |
|
|
|
|
|
#7 |
|
Senior Member
Join Date: Jun 2012
Drives: 2020 GMC Canyon Denali Diesel
Location: Florida
Posts: 1,997
Thanks: 1,651
Thanked 2,400 Times in 1,026 Posts
Mentioned: 117 Post(s)
Tagged: 0 Thread(s)
|
Swap to the upgraded engine harness and 2015+ coils....you'll never have the issue again.
__________________
2020 GMC Canyon Denali Duramax, 2021 Forester Sport, 2000 Subaru Legacy B4 RSK 5MT (JDM Import) and random 86 chassis rebuilds....
|
|
|
|
|
|
#8 | |
|
Senior Member
Join Date: May 2012
Drives: 2013 Series 10 6MT FR-S
Location: Moreno Valley, CA
Posts: 5,565
Thanks: 2,013
Thanked 2,043 Times in 1,474 Posts
Mentioned: 72 Post(s)
Tagged: 0 Thread(s)
|
Quote:
__________________
2013 Series 10 FRS #553
RCE T2's, SPC LCAs -4/2.6 camber JDL 4-2-1 EL, FP and OP, Tuned by Zach@CSG on e85 RR Wilwood Front/Rear Sport BBK, Motul 600 Fluid ARC-8 17x9 SX2 GTs 245s/Koing 17x8 v730's 225's |
|
|
|
|
|
|
#9 | |
|
Member
Join Date: May 2017
Drives: BRZ, E90 M3
Location: San Francisco, CA
Posts: 50
Thanks: 3
Thanked 8 Times in 5 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Quote:
|
|
|
|
|
|
|
#10 |
|
Senior Member
Join Date: Jun 2012
Drives: 2020 GMC Canyon Denali Diesel
Location: Florida
Posts: 1,997
Thanks: 1,651
Thanked 2,400 Times in 1,026 Posts
Mentioned: 117 Post(s)
Tagged: 0 Thread(s)
|
Sounds like something in the harness is shorting the coils...possibly a loose pin in once of the connectors...or a cut in a wire.
__________________
2020 GMC Canyon Denali Duramax, 2021 Forester Sport, 2000 Subaru Legacy B4 RSK 5MT (JDM Import) and random 86 chassis rebuilds....
|
|
|
|
|
|
#11 |
|
Member
Join Date: May 2017
Drives: BRZ, E90 M3
Location: San Francisco, CA
Posts: 50
Thanks: 3
Thanked 8 Times in 5 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Not sure, but I think failure is caused by the coil itself. Its the cheapo Autozone coil I used. Which is a Duralast brand. Will be buying OEM and seeing if that fails on the next HPDE day.
|
|
|
|
|
|
#12 |
|
Senior Member
Join Date: Jun 2012
Drives: 2020 GMC Canyon Denali Diesel
Location: Florida
Posts: 1,997
Thanks: 1,651
Thanked 2,400 Times in 1,026 Posts
Mentioned: 117 Post(s)
Tagged: 0 Thread(s)
|
Oh yeah, I wouldn't trust an aftermarket
__________________
2020 GMC Canyon Denali Duramax, 2021 Forester Sport, 2000 Subaru Legacy B4 RSK 5MT (JDM Import) and random 86 chassis rebuilds....
|
|
|
|
|
|
|
|
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Long cranks and engine struggling to start. Please help! | pakunodafie | Engine, Exhaust, Transmission | 17 | 09-08-2021 03:32 PM |
| 2014 BRZ P0303 Even After Replacing Spark Plugs and Coilpack | lc300 | Issues | Warranty | Recalls / TSB | 4 | 07-27-2019 07:18 PM |
| CEL, TCL, P0300, P0301, P0303 | drz400dude | Engine, Exhaust, Transmission | 1 | 03-13-2018 05:20 AM |
| FRS struggling to start (video) | FRStevan | Issues | Warranty | Recalls / TSB | 12 | 06-10-2017 03:48 AM |
| is anyone else struggling with this | ddr6 | Great Lakes | 12 | 01-01-2012 03:59 PM |