blew a piece of glass pack from my 60s

[NoHaveMSG]

Originally Posted by Breadman

wait i thought you just cut them out and tig on a new one. how are they serviceable?

What are you talking about? Most aftermarket cans on bikes are riveted or bolted together.

[humfrz]

Originally Posted by Decep

humfrz, you can shitpost on my threads whenever you want.

Awwww......thank ya, there, Decep - I'm running low on forums that let me post anymore -

[soundman98]

Originally Posted by humfrz

Awwww......thank ya, there, Decep - I'm running low on forums that let me post anymore -

really? some find your back in the day stories too much?

[humfrz]

Originally Posted by soundman98

really? some find your back in the day stories too much?

I reckon.

I remember back-in-the-day, going with my grandfather to take a load of corn into the feed mill. While waiting for the corn to be ground and sacked, I would have to sit around on the loading dock and listen to old men wearing bib overalls, chewing or smoking cigars tell back-in-the-day stories back to back for hours.

I often thought that if I ever get that way, I would hope that someone would just shoot me.

[soundman98]

and now you realize it's not as bad as you remember!

[alphasaur]

MORE THAN YOU CAN AFFORD HUMFRZ, TOMEI.

hope I'm not the only one that read that comment this way

[Breadman]

Originally Posted by DarkPira7e

I'm just really curious- what could've been going on where there was enough exhaust pressure to shed some of that material? And why were you there to see it come out?

i stuck an endo in my exhaust and the muffler is intact and not rusty at all but it kind of looks like when you put a thin dress sock on and you have random leg hairs poking through. Im guessing it is from the main resonator pipe. luck for me that is the expensive one... i guess ill just keep watching and see how bad it gets

[Summerwolf]

Originally Posted by Breadman

i stuck an endo in my exhaust and the muffler is intact and not rusty at all but it kind of looks like when you put a thin dress sock on and you have random leg hairs poking through. Im guessing it is from the main resonator pipe. luck for me that is the expensive one... i guess ill just keep watching and see how bad it gets

Likely the worse thing that will happen is a change in tone. If it really bothers you you could find a similar sized resonator and just have that replaced without having to replace the actual pipe. Any muffler shop could do that. You could also change resonator type to something like a moroso spiral flow or slp bullet (just for reference of type, not necessarily able to work) so that it didnt have packing at all. Vibrant, magnaflow etc all have a multitude of resonator shapes and sizes.

[Breadman]

Originally Posted by Summerwolf

Likely the worse thing that will happen is a change in tone. If it really bothers you you could find a similar sized resonator and just have that replaced without having to replace the actual pipe. Any muffler shop could do that. You could also change resonator type to something like a moroso spiral flow or slp bullet (just for reference of type, not necessarily able to work) so that it didnt have packing at all. Vibrant, magnaflow etc all have a multitude of resonator shapes and sizes.

i plan on putting a jdl ultra quiet in eventually so i'm look at it with the endoscope from that end and see what happens. unless im blowing out a bunch more pack before that i guess