Random Thoughts - Part Deux [NO POLITICS] - Page 4979 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Sapphireho · 05-10-2020, 11:45 PM

So I checked the connector to the backup sensor in the tranny, and checked the fuse, everything looks good and still no backup lights or "R" on the dash. So I guess the sensor is bad?

Ultramaroon · 05-11-2020, 12:08 AM

Quote:

Originally Posted by Sapphireho

So I checked the connector to the backup sensor in the tranny, and checked the fuse, everything looks good and still no backup lights or "R" on the dash. So I guess the sensor is bad?

Jump the pins with a wire and look for the reverse lights. That'll confirm it.

Ultramaroon · 05-11-2020, 12:18 AM

Quote:

Originally Posted by ichitaka05

I'm issei... in English, I'm first gen Japanese coming to US.

That's called being a naturalized citizen or immigrant. My parents immigrated. I'm first gen. Hungarian. Your kid will be first gen.

Sapphireho · 05-11-2020, 12:30 AM

Quote:

Originally Posted by Ultramaroon

Jump the pins with a wire and look for the reverse lights. That'll confirm it.

Good idea.

Ultramaroon · 05-11-2020, 12:38 AM

Quote:

Originally Posted by Sapphireho

Good idea.

I know.

Sapphireho · 05-11-2020, 01:16 AM

Quote:

Originally Posted by Ultramaroon

I know.

Yep. Jumped and have backup lights. Man that switch looks hard to get to from under the car.

First toyota/Subaru failure at 5 years 23k miles.

Kiske · 05-11-2020, 01:40 AM

Go super excited as I found some billet toggles that might work for my dash panel project...

Name: ironworksspeedandkustomcom.jpg
Views: 404
Size: 60.7 KB

Name: ironworksspeedandkustomcom.jpg
Views: 404
Size: 60.7 KB

Sadly after a half hour of measurements it seems they are about 1/2" too tall to work without covering the HVAC display. I could possibly cut the toggle bases down and then grind, sand and smooth all them but, it is way too much work required when each switch is $90 USD. If all else fails I'll shoot them a message to see about custom work I guess.

The search goes on.

Ultramaroon · 05-11-2020, 01:49 AM

Quote:

Originally Posted by Sapphireho

Yep. Jumped and have backup lights. Man that switch looks hard to get to from under the car.

First toyota/Subaru failure at 5 years 23k miles.

I don't remember just how much I had to remove before I could pull down on the rear extension enough to get at it. I think it was just the flexible coupling between the over and front pipes.

Sapphireho · 05-11-2020, 01:57 AM

Quote:

Originally Posted by Ultramaroon

I don't remember just how much I had to remove before I could pull down on the rear extension enough to get at it. I think it was just the flexible coupling between the over and front pipes.

Worst backup light switch design ever!

Ultramaroon · 05-11-2020, 02:07 AM

Quote:

Originally Posted by Sapphireho

Worst backup light switch design ever!

lolol... I just told Mrs. Ultra about the long running worst-design-ever joke to explain my outburst.

humfrz · 05-11-2020, 02:07 AM

Quote:

Originally Posted by Sapphireho

Worst backup light switch design ever!

Did you and @Ultramaroon get your oximeters?

If so, how do they work.

I received mine and it works good, shows I usually have from 95 to 98% whatevers.

humfrz · 05-11-2020, 02:10 AM

Quote:

Originally Posted by Ultramaroon

I know.

Ultramaroon · 05-11-2020, 02:11 AM

Quote:

Originally Posted by humfrz

Ultramaroon · 05-11-2020, 02:12 AM

Quote:

Originally Posted by humfrz

Did you and @Ultramaroon get your oximeters?

If so, how do they work.

I received mine and it works good, shows I usually have from 95 to 98% whatevers.

Yeah. We got ours. It has a neat display. I get about the same whatevers.

05-11-2020, 01:40 AM	#69699
Kiske Senior Member Join Date: Jun 2013 Drives: RX-7 / BRZ Location: USA Posts: 2,349 Thanks: 1,031 Thanked 2,501 Times in 1,081 Posts Mentioned: 27 Post(s) Tagged: 0 Thread(s)	Go super excited as I found some billet toggles that might work for my dash panel project... Sadly after a half hour of measurements it seems they are about 1/2" too tall to work without covering the HVAC display. I could possibly cut the toggle bases down and then grind, sand and smooth all them but, it is way too much work required when each switch is $90 USD. If all else fails I'll shoot them a message to see about custom work I guess. The search goes on. __________________ //2013 World Rally Blue BRZ Limited FBM Turbo--gone //2018 Crystal White Pearl BRZ Ts 2.2l Harrop Supercharged Last edited by Kiske; 05-11-2020 at 01:55 AM.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Language Rant Part Deux	MuseChaser	Off-Topic Lounge [WARNING: NO POLITICS]	43	04-23-2017 08:55 PM
Random thoughts thread	MrVito	Off-Topic Lounge [WARNING: NO POLITICS]	37188	02-25-2016 11:00 AM
Random Rubber Part	OoLong	BRZ First-Gen (2012+) — General Topics	8	01-28-2014 11:31 AM
Crew Carshow : Part Deux 9/7/13	saiyajinimports	Great Lakes	0	08-17-2013 06:18 AM

05-10-2020, 11:45 PM	#69693
Sapphireho Famous Potatoes Join Date: Mar 2016 Drives: '15 ultramarine Location: Idaho Posts: 14,043 Thanks: 5,808 Thanked 19,640 Times in 9,241 Posts Mentioned: 162 Post(s) Tagged: 0 Thread(s)	So I checked the connector to the backup sensor in the tranny, and checked the fuse, everything looks good and still no backup lights or "R" on the dash. So I guess the sensor is bad?

User Name		Remember Me?
Password