BRZ Ts parts - Page 180 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

johan · 02-23-2018, 10:46 PM

Quote:

Originally Posted by spike021

What’s the install like for these? Do you have to pull the bumper?

Install is awkward, but fine. Hardest part is getting the fogs out. I just jacked up each side as I worked on it to make it easier to access stuff under the bumper. Take all the screws/clips out of the fender liner on that corner of the car, that way you can drop it a bit/pull it away from the bumper. I then reached my hand through the gap between the liner and bumper to get access to the fasteners on the fogs. There are 2 philips metal screws and one bitch of a philips plastic screw that doesn't really want to come out without extreme care - and of course it's in the most difficult to access location.

Once the fogs are out, then you just have to get all the clips disengaged and it pops out... a bit of force helps.

Doing both sides took me about an hour or so.

Attached one more angle, this time showing off the spoiler risers

switchlanez · 02-24-2018, 01:30 PM

Results of my installing the strips this morning.

Sergeb96 · 02-24-2018, 01:31 PM

Quote:

Originally Posted by switchlanez

Results of my installing the strips this morning.

That front one actually looks really good. Might need to get one.

Sent from my iPhone using Tapatalk

JonRZ · 02-24-2018, 03:11 PM

Quote:

Originally Posted by Sergeb96

Is this a pic of your car? I’ll probably just get this sill then.

Yep! Side note: I got a nice console light on Amazon for $20 and it's wicked nice. Looks very OEM, fits perfect and is bright. PM if anyone wants the link.

Second side note: My tS/STI wheels shipped and are expected on Friday. I'll post pics.

nikitopo · 02-25-2018, 06:46 AM

Did anyone use the drilled STI rotors?

https://www.sti.jp/parts/subarubrz_z.../ST26300ST000/
https://www.sti.jp/parts/subarubrz_z.../ST26700ST000/

Sergeb96 · 02-25-2018, 01:14 PM

Has anybody done this sti pinstripe to their brz? Price? Any pics of what it looks like installed? Thanks

Sent from my iPhone using Tapatalk

norcalpb · 02-26-2018, 02:03 AM

Found a part # for the sti flexible draw stiffener
Xxxxxxxxxxxx - $454.86 (this part # is not correct)

Edit: and I think I found the flexible v bars. Can someone confirm?
Left: 50866CA030 - $200.74
https://www.mysubarupartstore.com/oe...and-50866ca030
Right: 50866CA020 - $200.74
https://www.mysubarupartstore.com/oe...and-50866ca020

These are about $200 more than the standard “stay complete”s found on previous years.

weederr33 · 03-02-2018, 02:11 PM

Does anyone know the part number for the red tS shift knob?

johan · 03-02-2018, 03:19 PM

Quote:

Originally Posted by weederr33

Does anyone know the part number for the red tS shift knob?

35022CA100

JonRZ · 03-03-2018, 11:29 AM

As promised - here's the tS/STI 18x7.5 wheels! Still need to order the center caps and some tires!

Part #:28111CA130

johan · 03-03-2018, 03:03 PM

Quote:

Originally Posted by JonRZ

As promised - here's the tS/STI 18x7.5 wheels! Still need to order the center caps and some tires!

Part #:28111CA130

I assume those say Enkei somewhere on the inside. It's just an OEM RS05RR, like the RS 2.0 had (of course 18" instead of 17" on the RS).

yurikaze · 03-03-2018, 04:01 PM

Quote:

Originally Posted by johan

I assume those say Enkei somewhere on the inside. It's just an OEM RS05RR, like the RS 2.0 had (of course 18" instead of 17" on the RS).

They do in fact say Enkei.

johan · 03-03-2018, 04:39 PM

Also, to be clear - when I say it's "just" an RS05RR, I say so with respect - the RS05RR is one of my favorite wheels, totally badass.

nikitopo · 03-03-2018, 04:50 PM

Quote:

Originally Posted by johan

Also, to be clear - when I say it's "just" an RS05RR, I say so with respect - the RS05RR is one of my favorite wheels, totally badass.

Yes they are nice wheels.

02-24-2018, 01:30 PM	#2508
switchlanez Glorious BRZ Master Race Join Date: Apr 2011 Drives: Subaru Libird Location: Race Wars Posts: 3,645 Thanks: 1,050 Thanked 2,719 Times in 1,079 Posts Mentioned: 110 Post(s) Tagged: 0 Thread(s)	Results of my installing the strips this morning. Attached Images __________________ << BUILD THREAD >> Last edited by switchlanez; 02-24-2018 at 04:16 PM.

02-26-2018, 02:03 AM	#2513
norcalpb Senior Member Join Date: Oct 2013 Drives: 2013 BRZ, 2023 Model 3 Location: SF Bay Area Posts: 2,341 Thanks: 1,254 Thanked 899 Times in 589 Posts Mentioned: 15 Post(s) Tagged: 0 Thread(s)	Found a part # for the sti flexible draw stiffener Xxxxxxxxxxxx - $454.86 (this part # is not correct) Edit: and I think I found the flexible v bars. Can someone confirm? Left: 50866CA030 - $200.74 https://www.mysubarupartstore.com/oe...and-50866ca030 Right: 50866CA020 - $200.74 https://www.mysubarupartstore.com/oe...and-50866ca020 These are about $200 more than the standard “stay complete”s found on previous years. Last edited by norcalpb; 03-03-2018 at 10:21 PM.

03-02-2018, 02:11 PM	#2514
weederr33 Airborne at your service Join Date: Sep 2014 Drives: '17 BRZ Series.Yellow Location: El Paso, Texas Posts: 6,420 Thanks: 4,578 Thanked 5,706 Times in 2,992 Posts Mentioned: 33 Post(s) Tagged: 2 Thread(s)	Does anyone know the part number for the red tS shift knob? __________________ Series.Yellowbird - http://www.ft86club.com/forums/showthread.php?t=122135 MS, CSCS, TSAC-F, CPT

03-03-2018, 11:29 AM	#2516
JonRZ Member Join Date: Jan 2017 Drives: 2017 CWP BRZ w/ PP Location: Pittsburgh, PA Posts: 80 Thanks: 62 Thanked 102 Times in 34 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	As promised - here's the tS/STI 18x7.5 wheels! Still need to order the center caps and some tires! Part #:28111CA130 Attached Images __________________ My 2017 JDM tS Build IG: @TheJonRZ

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

02-25-2018, 06:46 AM	#2511
nikitopo Senior Member Join Date: Mar 2014 Drives: '15 BRZ RA Location: Greece Posts: 3,787 Thanks: 2,417 Thanked 1,947 Times in 1,263 Posts Mentioned: 29 Post(s) Tagged: 0 Thread(s)	Did anyone use the drilled STI rotors? https://www.sti.jp/parts/subarubrz_z.../ST26300ST000/ https://www.sti.jp/parts/subarubrz_z.../ST26700ST000/

02-25-2018, 01:14 PM	#2512
Sergeb96 Senior Member Join Date: Feb 2017 Drives: 2013 Subaru BRZ Premium MT Location: Portland OR Posts: 271 Thanks: 32 Thanked 64 Times in 38 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	Has anybody done this sti pinstripe to their brz? Price? Any pics of what it looks like installed? Thanks Sent from my iPhone using Tapatalk

03-03-2018, 04:39 PM	#2519
johan Senior Member Join Date: Aug 2014 Drives: '14 981CS, '99 NB1 Location: Oregon Posts: 1,274 Thanks: 1,234 Thanked 1,201 Times in 631 Posts Mentioned: 114 Post(s) Tagged: 2 Thread(s)	Also, to be clear - when I say it's "just" an RS05RR, I say so with respect - the RS05RR is one of my favorite wheels, totally badass.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
WTB: Parts for my FR-S	hyperpunx	Interior Parts (Incl. Lighting)	1	03-05-2013 06:28 PM
[Group Deals] SoCal Subaru BRZ parts or Any Parts	Giccin	Southern California	25	08-26-2012 11:30 AM

User Name		Remember Me?
Password