BRZ Ts parts - Page 45 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

krayzie · 04-28-2014, 07:41 PM

Quote:

Originally Posted by mister.bond

THANK YOU; but please excuse me about asking again.....

what is the result when i buy and install the stuff ????

what happens to my steering then ????

It will probably improve the steering center feel and initial turn-in I would imagine, and increase feedback when you corner hard.

If you are worried about increased NVH, then look into the STI flexible tower bar instead (it seems STI always push the flexible tower bar as the first mod or could be the only mod you should buy from them).

ICantAffordAnLFA · 04-29-2014, 01:41 PM

Anyone ordered the gt wing yet?

http://www.japanparts.com/db/parts_d...=&SEARCH_page=

chanomatik · 04-29-2014, 03:43 PM

I want that wing, but not until I'm over 200WHP. I go fast.

Ouhei · 04-30-2014, 08:52 AM

Quote:

Originally Posted by ICantAffordAnLFA

Anyone ordered the gt wing yet?

http://www.japanparts.com/db/parts_d...=&SEARCH_page=

I would, but $2,700 is a stiff price.

krayzie · 04-30-2014, 04:11 PM

Quote:

Originally Posted by Ouhei

I would, but $2,700 is a stiff price.

Already cheaper than the one for the WRX STI @ 324,000yen.

http://www.sti.jp/parts/catalogue/im...6050ZR530.html

krayzie · 05-01-2014, 06:00 PM

Shit the STI filter looks stock (aside from some weird green rayon looking stuff on it). It's Made in China too. The stock filter is Toyota Denso Made in Japan. I guess you guys can skip this one lol!

AznBRZer · 05-01-2014, 06:07 PM

Quote:

Originally Posted by krayzie

Shit the STI filter looks stock (aside from some weird green rayon looking stuff on it). It's Made in China too. The stock filter is Toyota Denso Made in Japan. I guess you guys can skip this one lol!

Yeah, but does it say STI on it? That alone makes it worth it!

chanomatik · 05-01-2014, 06:22 PM

Quote:

Originally Posted by Ouhei

I would, but $2,700 is a stiff price.

Stiff price for a... stiff part, amIrite?!

I'm glad there's nothing out that I MUST have from the tS cosmetically. All that's left for my wants are the stiffer mounts.

They need to stop teasing us and just give the dang BRZ STI Concept and BRZ GT300 fender garnishes, though.

Would probably be $500, but I don't care! Must. Have. In. Life.

mister.bond · 05-01-2014, 06:34 PM

Krayzie seems to be right

the STI Filter looks exactly like the stock one

even the substance looks like stock......

i do not see any difference .....

but i will ask for and come back to that......

krayzie · 05-01-2014, 08:03 PM

Quote:

Originally Posted by mister.bond

Krayzie seems to be right

the STI Filter looks exactly like the stock one

even the substance looks like stock......

i do not see any difference .....

but i will ask for and come back to that......

See what I don't understand is, if it is exactly the same part as stock, why go thru the trouble and create the STI part for it? Maybe there's a difference somewhere idk.

If I examine them closely side by side, the hairy stuff on the STI one is green, while on the stock one it's white.

The STI radiator cap tho I like, it is made by Nippon Denso ("ND") so I know it's quality, pressure at 1.3 bar instead of 1.1 bar. Again it looks exactly the same as stock other than the pressure marking difference engraved onto the cap.

Createddeleted · 05-01-2014, 08:50 PM

Quote:

Originally Posted by krayzie

See what I don't understand is, if it is exactly the same part as stock, why go thru the trouble and create the STI part for it? Maybe there's a difference somewhere idk.

If I examine them closely side by side, the hairy stuff on the STI one is green, while on the stock one it's white.

The STI radiator cap tho I like, it is made by Nippon Denso ("ND") so I know it's quality, pressure at 1.3 bar instead of 1.1 bar. Again it looks exactly the same as stock other than the pressure marking difference engraved onto the cap.

I'm with you on this one. The trd high flow filter is the same, it's just a red color. So it may be made different. This may be the same as the trd just not dyed red.

DSOmegaX · 05-02-2014, 01:21 AM

Quote:

Originally Posted by krayzie

See what I don't understand is, if it is exactly the same part as stock, why go thru the trouble and create the STI part for it? Maybe there's a difference somewhere idk.

If I examine them closely side by side, the hairy stuff on the STI one is green, while on the stock one it's white.

The STI radiator cap tho I like, it is made by Nippon Denso ("ND") so I know it's quality, pressure at 1.3 bar instead of 1.1 bar. Again it looks exactly the same as stock other than the pressure marking difference engraved onto the cap.

I don't think radiator caps really are suppose to look different from one another =P. As far as the filter goes, I think its continued proof that the stock intake design was as good as it can get.

Sent from my Nexus 5 using Tapatalk

Trap63 · 05-02-2014, 06:07 AM

Done! tS stripes! and STI rear emblem

krayzie · 05-02-2014, 06:46 AM

Quote:

Originally Posted by Trap63

Done! tS stripes! and STI rear emblem

So this pin stripe set is not made exclusively for the tS but for the normal BRZ too. I was wondering why they have it as an option for the Legacy.

http://www.sti.jp/parts/catalogue/bm...1042EZ000.html

04-29-2014, 01:41 PM	#618
ICantAffordAnLFA Senior Member Join Date: May 2012 Drives: Brz, Legacy Location: London, England Posts: 320 Thanks: 36 Thanked 120 Times in 66 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	Anyone ordered the gt wing yet? http://www.japanparts.com/db/parts_d...=&SEARCH_page= __________________ Trackday ride with built motor Mods: Going, Stopping, Handling Parts: CP, Pauter, Sprintex, Ecutek, Milltek, STI, Rays, Defi, Essex AP Racing, Bilstein, Whiteline, Perrin, RacerX

05-02-2014, 06:07 AM	#629
Trap63 Senior Member Join Date: Apr 2013 Drives: Brz WRB - Europe LHD Location: TURIN - Piedmont - ITALY Posts: 922 Thanks: 1,176 Thanked 839 Times in 289 Posts Mentioned: 40 Post(s) Tagged: 1 Thread(s)	Done! tS stripes! and STI rear emblem __________________

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
WTB: Parts for my FR-S	hyperpunx	Interior Parts (Incl. Lighting)	1	03-05-2013 06:28 PM
[Group Deals] SoCal Subaru BRZ parts or Any Parts	Giccin	Southern California	25	08-26-2012 11:30 AM

04-29-2014, 03:43 PM	#619
chanomatik Snow Don't Hurt! Join Date: Jul 2012 Drives: 2013 BRZ Limited 6MT CBS Location: Anchorage, Alaska, USA Posts: 2,538 Thanks: 6,416 Thanked 1,497 Times in 902 Posts Mentioned: 42 Post(s) Tagged: 0 Thread(s)	I want that wing, but not until I'm over 200WHP. I go fast.

05-01-2014, 06:00 PM	#622
krayzie Drive From Home Join Date: Dec 2013 Drives: BRZ STI Performance Location: Filth City Posts: 4,912 Thanks: 2,368 Thanked 3,111 Times in 2,007 Posts Mentioned: 30 Post(s) Tagged: 1 Thread(s)	Shit the STI filter looks stock (aside from some weird green rayon looking stuff on it). It's Made in China too. The stock filter is Toyota Denso Made in Japan. I guess you guys can skip this one lol!

05-01-2014, 06:34 PM	#625
mister.bond Senior Member Join Date: Feb 2014 Drives: BRZ Subaru Location: Germany Posts: 171 Thanks: 45 Thanked 94 Times in 46 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Krayzie seems to be right the STI Filter looks exactly like the stock one even the substance looks like stock...... i do not see any difference ..... but i will ask for and come back to that......

User Name		Remember Me?
Password