ECUFlash - Getting close!

[t1ao]

Anyone know how to add the launch control tables from 900C to B00C? Or should I just re-flash my B00C to 900C? Didn't really want to go backwards with ROMs. There both ROMs for US 6MT, so I think using the 900C should work fine, but id rather just add the launch control to the B00C. Any is help appreciated.

[Td-d]

Originally Posted by t1ao

Anyone know how to add the launch control tables from 900C to B00C? Or should I just re-flash my B00C to 900C? Didn't really want to go backwards with ROMs. There both ROMs for US 6MT, so I think using the 900C should work fine, but id rather just add the launch control to the B00C. Any is help appreciated.

I assume it's just a case of inserting the tables into the Romraider definition - download the definition from the OFT site, and grab the tables from there (assuming that LC and FFS is implemented in B01C).

[EAGLE5]

Originally Posted by t1ao

Anyone know how to add the launch control tables from 900C to B00C? Or should I just re-flash my B00C to 900C? Didn't really want to go backwards with ROMs. There both ROMs for US 6MT, so I think using the 900C should work fine, but id rather just add the launch control to the B00C. Any is help appreciated.

Why not use the B01C stage 1 OFT ROM?

[EAGLE5]

@Td-d,
Is there anything else you are looking to define or fix in the ROMs?

[Td-d]

Originally Posted by jsimon7777

@Td-d,
Is there anything else you are looking to define or fix in the ROMs?

Other than expanding some of the logging parameters, nothing else springs to mind at this stage. Why - are you looking for something specific.

One of these days I'll also move some the tables out of the 'Alpha BRZ' section into the appropriate subsections in the definitions.

[t1ao]

Originally Posted by jsimon7777

Why not use the B01C stage 1 OFT ROM?

Originally Posted by shiv@vishnu
Launch control and FFS does not supported in the new 2014 B series ROMs just yet.

Only 700c, 900c, a00c, and a01c have launch control at this time.

http://www.ft86club.com/forums/showthread.php?t=53902

A01C looks like it is a ROM from a 6mt 2012, mine is a 2014 6mt that had b00C factory, I'd like launch control. The older ROM should work, right?

[EAGLE5]

Originally Posted by Td-d

Other than expanding some of the logging parameters, nothing else springs to mind at this stage. Why - are you looking for something specific.

One of these days I'll also move some the tables out of the 'Alpha BRZ' section into the appropriate subsections in the definitions.

Nope. Not really looking for anything. You've done an awesome job.

It would be nice to see hacked ROMs someday, adding turbo support (stolen from the FA20 turbo?) and hijacking sensor input. I don't think that's your department, though.

[EAGLE5]

Originally Posted by t1ao

Only 700c, 900c, a00c, and a01c have launch control at this time.

http://www.ft86club.com/forums/showthread.php?t=53902

A01C looks like it is a ROM from a 6mt 2012, mine is a 2014 6mt that had b00C factory, I'd like launch control. The older ROM should work, right?
[/I]

As far as I know, all of them work fine in any US 6mt. My car came with 01c, and I never tried going backwards, but it shouldn't be a problem since the hardware is the same. Reader beware.

[AdrianG]

@Td-d how's the hunt for logging parameters coming along? Any news on AVCS or a nice easy trigger like the defogger switch?

- AdrianG

[Td-d]

Originally Posted by AdrianG

@Td-d how's the hunt for logging parameters coming along? Any news on AVCS or a nice easy trigger like the defogger switch?

- AdrianG

Try this for me (ZA1JA01C):

RAM:FFF89393 Ram_Defogger_Switch

Define as an 8bit parameter, add to the logcfg.txt and toggle the defogger on and off - let me know if that's it.

[AdrianG]

Originally Posted by Td-d

Try this for me (ZA1JA01C):

RAM:FFF89393 Ram_Defogger_Switch

Define as an 8bit parameter, add to the logcfg.txt and toggle the defogger on and off - let me know if that's it.

EDIT: @Td-d I thank you. It works!

http://datazap.me/u/adriang/defogger...og=0&data=8-21

[AdrianG]

I have updated the logcfg.txt i have published on DropBox to use the defogger as a trigger, for anyone who is interested in using it.

[Td-d]

Originally Posted by AdrianG

EDIT: @Td-d I thank you. It works!

http://datazap.me/u/adriang/defogger...og=0&data=8-21

Fantastic! Ok, one down

[Td-d]

Originally Posted by AdrianG

@Td-dAny news on AVCS or a nice easy trigger like the defogger switch?

- AdrianG

I've already defined intake and Exhaust AVCS - did I not post it up?

RAM:FFF8C0E8 Intake_VVT_Advance_Angle_Right:.res.b 1 ; DATA XREF: 
RAM:FFF8C0EC Intake_VVT_Advance_Angle_Left:.res.b 1  ; DATA XREF: 

RAM:FFF8C130 Exhaust_VVT_Retard_Angle_Right:.res.b 1 ; DATA XREF: 
RAM:FFF8C134 Exhaust_VVT_Retard_Angle_Left:.res.b 1 ; DATA XREF: