turbo with hood - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Reaper · 02-04-2014, 05:04 PM

mods move if needed

I know there is already a thread on this but it seemed to not go anywhere.

Who has ran a front mount turbo with the factory hood then changed to a vented? An oil cooler and an upgraded radiator is MORE $ than a vented hood and i dont care how good your cooler is its hard to get air to move into a sealed box.
On a budget i honestly think vented with stock cooling system will be more beneficial.
DISCUSS!

Ironsquid · 02-04-2014, 05:06 PM

majorly depends if you have a water cooled turbo

cdrazic93 · 02-05-2014, 12:36 PM

Quote:

Originally Posted by Reaper

mods move if needed

I know there is already a thread on this but it seemed to not go anywhere.

Who has ran a front mount turbo with the factory hood then changed to a vented? An oil cooler and an upgraded radiator is MORE $ than a vented hood and i dont care how good your cooler is its hard to get air to move into a sealed box.
On a budget i honestly think vented with stock cooling system will be more beneficial.
DISCUSS!

IMO the bottom mount turbo is better for heat. Although I would still recommend a upgraded radiator and an oil cooler anyway (or a vented hood). with a front mount setup, I have heard of people that have a upgraded rad and oil cooler still not being able to keep engine heat down, someone needs to do a compairison to see which effectively cools more, stock cooling and vented hood vs stock hood and upgraded cooling.

What has been said, water cooled turbos are the best option.

not sure where youve been looking at vented hoods but I'd go with seibon and it's not exactly cheaper than a koyo rad and a oil cooler kit

qtwre · 02-05-2014, 12:51 PM

One thing people may not have noticed is @CARNZ pieced together the coolant-cooled oil cooler from the new Forester XT. It's substantially cheaper than the air-cooled kits.
http://www.ft86club.com/forums/showthread.php?t=50427

I'm not sure how it compares to the aftermarket kits though.

cdrazic93 · 02-05-2014, 02:12 PM

Quote:

Originally Posted by qtwre

coolant-cooled

Lol coolant-cooled...

qtwre · 02-05-2014, 03:46 PM

Quote:

Originally Posted by cdrazic93

Lol coolant-cooled...

Sorry, coolanted I believe was the term I was looking for.

carbonBLUE · 02-05-2014, 04:09 PM

Quote:

Originally Posted by qtwre

One thing people may not have noticed is @CARNZ pieced together the coolant-cooled oil cooler from the new Forester XT. It's substantially cheaper than the air-cooled kits.
http://www.ft86club.com/forums/showthread.php?t=50427

I'm not sure how it compares to the aftermarket kits though.

the draw back of that system, if it ever gets damaged, you will have oil and coolant mixing = bad :/

qtwre · 02-05-2014, 11:20 PM

I suppose, but it would have to be the sandwich plate that gets damaged. It's an OEM solution so I trust that it's pretty good.

kbye · 02-06-2014, 01:00 AM

The XT cooler will be just as reliable if not more so than aftermarket solutions. it's just a sandwich plate and a bunch of hard lines. subaru have been using them for years.

Reaper · 02-06-2014, 02:46 PM

his system(forester oem) runs coolant through a sandwich plate around the oil filter unlike other systems that run the oil through a seperate tank in the radiator.

The forester system is NOT as effective on a water cooled turbo since it is essentially doing the same thing. Running coolant through the turbo while oil is running through it. But if i was running an oil only turbo i would use it.

02-04-2014, 05:04 PM	#1
Reaper in orbe terrum non visi Join Date: Jan 2014 Drives: violent Location: Mountains Posts: 1,747 Thanks: 279 Thanked 762 Times in 446 Posts Mentioned: 62 Post(s) Tagged: 1 Thread(s)	turbo with hood mods move if needed I know there is already a thread on this but it seemed to not go anywhere. Who has ran a front mount turbo with the factory hood then changed to a vented? An oil cooler and an upgraded radiator is MORE $ than a vented hood and i dont care how good your cooler is its hard to get air to move into a sealed box. On a budget i honestly think vented with stock cooling system will be more beneficial. DISCUSS!

02-04-2014, 05:06 PM	#2
Ironsquid King of Kiwi Palace Join Date: Aug 2012 Drives: Faster than you Location: Everywhere Posts: 585 Thanks: 184 Thanked 578 Times in 264 Posts Mentioned: 33 Post(s) Tagged: 0 Thread(s)	majorly depends if you have a water cooled turbo __________________

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Carbon hood and hood dampers??	ft86me	Cosmetic Modification (Interior/Exterior/Lighting)	15	10-19-2013 12:57 PM
Hood pins with vis hood or is it okay	Frs32907	Cosmetic Modification (Interior/Exterior/Lighting)	2	07-31-2013 09:02 PM
Looking for vis aem hood or seibon fa hood ready to ship	Frs32907	Cosmetic Modification (Interior/Exterior/Lighting)	2	07-30-2013 12:25 AM
Looking for Hood Dampers meant for CF hood.	Vicious LED	Scion FR-S / Toyota 86 GT86 General Forum	3	12-31-2012 03:47 AM

02-05-2014, 12:51 PM	#4
qtwre Senior Member Join Date: Jun 2012 Drives: White FR-S Location: GTA, Ontario Posts: 190 Thanks: 15 Thanked 35 Times in 30 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	One thing people may not have noticed is @CARNZ pieced together the coolant-cooled oil cooler from the new Forester XT. It's substantially cheaper than the air-cooled kits. http://www.ft86club.com/forums/showthread.php?t=50427 I'm not sure how it compares to the aftermarket kits though.

02-05-2014, 11:20 PM	#8
qtwre Senior Member Join Date: Jun 2012 Drives: White FR-S Location: GTA, Ontario Posts: 190 Thanks: 15 Thanked 35 Times in 30 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	I suppose, but it would have to be the sandwich plate that gets damaged. It's an OEM solution so I trust that it's pretty good.

02-06-2014, 01:00 AM	#9
kbye Senior Member Join Date: Feb 2013 Drives: 2014 FR-S Location: Calgary Posts: 460 Thanks: 64 Thanked 441 Times in 140 Posts Mentioned: 9 Post(s) Tagged: 2 Thread(s)	The XT cooler will be just as reliable if not more so than aftermarket solutions. it's just a sandwich plate and a bunch of hard lines. subaru have been using them for years.

02-06-2014, 02:46 PM	#10
Reaper in orbe terrum non visi Join Date: Jan 2014 Drives: violent Location: Mountains Posts: 1,747 Thanks: 279 Thanked 762 Times in 446 Posts Mentioned: 62 Post(s) Tagged: 1 Thread(s)	his system(forester oem) runs coolant through a sandwich plate around the oil filter unlike other systems that run the oil through a seperate tank in the radiator. The forester system is NOT as effective on a water cooled turbo since it is essentially doing the same thing. Running coolant through the turbo while oil is running through it. But if i was running an oil only turbo i would use it.

User Name		Remember Me?
Password