|
||||||
| Electronics | Audio | NAV | Infotainment Anything related to in-car electronics, navigation, and infotainment. |
![]() |
|
|
Thread Tools | Search this Thread |
|
|
#1 |
|
Senior Member
Join Date: Apr 2013
Drives: Brz WRB - Europe LHD
Location: TURIN - Piedmont - ITALY
Posts: 922
Thanks: 1,176
Thanked 838 Times in 289 Posts
Mentioned: 40 Post(s)
Tagged: 1 Thread(s)
|
Subaru Wiring technician expert help...
First of all thanks!
Subaru BRZ has an inside accessory harness beside front panel, here you can wire accessories with proper harness, the IV I wire the harness IV to twin foot (JDM blue and white alternate) and control module. I tried several times without success. So I read very well wiring cable procedures and try with tester to see if voltage is there…(no voltage on pin 11 and 14) Today I decide to see and tester the 15 pins harness on car …and I found the problem. My car harness is populate only for the two lines of pins, there aren't pins from 10 to 15 and pin 11 (room lamp) and pin 14 (B KUP) are mandatory to properly operates. I enclose photos of my harness on car where you can see loosing pins. The questions is: Where can I take the signal of these two loosing wire? Thanks…. ![]() ![]() ![]() ![]() ![]()
__________________
![]() |
|
|
|
|
|
#2 |
|
Senior Member
Join Date: Nov 2012
Drives: White 2013 BRZ Limited 6MT
Location: East Bay, Ca
Posts: 480
Thanks: 297
Thanked 147 Times in 106 Posts
Mentioned: 21 Post(s)
Tagged: 0 Thread(s)
|
Finally!! Someone else sees this mystery harness. So have you figured out exactly what this goes to? Or even what you can use it for? Would love to see what we can do with this
|
|
|
|
| The Following User Says Thank You to omegared19 For This Useful Post: | Trap63 (08-06-2013) |
|
|
#3 | |
|
Senior Member
Join Date: Apr 2013
Drives: Brz WRB - Europe LHD
Location: TURIN - Piedmont - ITALY
Posts: 922
Thanks: 1,176
Thanked 838 Times in 289 Posts
Mentioned: 40 Post(s)
Tagged: 1 Thread(s)
|
Quote:
For twin foot dual (blue and white in accordance to light on or engine on) is mandatory wiring to pins 11 and 14. Japanparts send me translate diagram (thanks....) to english (I already know them....as meaning), but I googled sometimes ago. Problem still live...no pins as you can see in my first picture... Therefore some subaru technician is required. I think you can do a lot of things with HarnessIV ![]() By the way their english is very broken (Ok I am not Shakespeare...but I speak since 1980....) and some definitions aren't common on english car diagram. So BKUP might mean backup lamp? room lamp is the map light? or something else? California : http://www.dmv.ca.gov/pubs/vctop/d12/vc24606.htm CTY means courtesy? where are they in car wiring diagram? This is the diagram of car accessories harness (HarnessIV), you can see what it can manage
__________________
![]() Last edited by Trap63; 08-06-2013 at 05:02 PM. |
|
|
|
|
| The Following User Says Thank You to Trap63 For This Useful Post: | omegared19 (08-06-2013) |
|
|
|
|
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Modifying the exhaust from an expert | jpit | Engine, Exhaust, Transmission | 33 | 06-27-2013 01:52 AM |
| TSM | Long time Subaru expert joins the BRZ/FR-S crowd! | Mike@TSM | Announcements, Contests, Giveaways | 2 | 02-27-2013 12:46 PM |
| need your guys expert help! | MontrealFRS | Scion FR-S / Toyota 86 GT86 General Forum | 31 | 01-21-2013 04:43 PM |
| Need Expert on Retrofit !! | Ericfrs | Cosmetic Modification (Interior/Exterior/Lighting) | 3 | 07-22-2012 01:22 PM |