Reverse lockout is stiff

[shern]

Hey guys so i have a problem and idk how to fix it, hoping one of you guys can help me out So whenever I lift up my reverse lockout to go into reverse it gets stuck, i am able to put it in reverse but when i take it out of reverse and put it in neutral the lever doesn't fall back down it stays up.

[zc06_kisstherain]

maybe something sticky lub? i would disassemble lock and see what happens.

[stevesnj]

Originally Posted by shern

Hey guys so i have a problem and idk how to fix it, hoping one of you guys can help me out So whenever I lift up my reverse lockout to go into reverse it gets stuck, i am able to put it in reverse but when i take it out of reverse and put it in neutral the lever doesn't fall back down it stays up.

If you have the stock shift knob just pry down the grey plastic collar and you'll see white plastic which is the plastic slipper for the lockout lever to slide against. Get some spray lithium grease and spray a little between the white slipper and the inside of the lockout lever.

[shern]

thanks man this is going to be helpful but also when i lift up the lever it slightly turns to the right :/

[fumanchu1]

Originally Posted by shern

thanks man this is going to be helpful but also when i lift up the lever it slightly turns to the right :/

Then you might want to check the lockout pin, it may be loose? defective or something as from memory it shouldn't be moving/rotating while raising it.

[shern]

Originally Posted by fumanchu1

Then you might want to check the lockout pin, it may be loose? defective or something as from memory it shouldn't be moving/rotating while raising it.

yeah man rn im dissembling it and the white plastic things are a little crocked so I'm gonna heat them up and re instal hopefully all works well!

[humfrz]

Originally Posted by shern

yeah man rn im dissembling it and the white plastic things are a little crocked so I'm gonna heat them up and re instal hopefully all works well!

Now, WHAT could go wrong with that ......


humfrz

[Ultramaroon]

Originally Posted by humfrz

Now, WHAT could go wrong with that ......


humfrz

"WTB - stock shift lever"

[shern]

Originally Posted by Ultramaroon

"WTB - stock shift lever"

Maybeeee How much

[Ultramaroon]

Originally Posted by shern

Maybeeee How much

Uh oh. Don't give up.

[shern]

Originally Posted by Ultramaroon

Uh oh. Don't give up.

hahha i took it apart last night and the shifter is a little twisted i think :/

[Packofcrows]

Originally Posted by Ultramaroon

"WTB - stock shift lever"

$50 plus $300 for snh.

[shern]

Originally Posted by Packofcrows

$50 plus $300 for snh.

sorry 300 is to much lol

[Ultramaroon]

Originally Posted by shern

hahha i took it apart last night and the shifter is a little twisted i think :/

You mean the slippy tape, or is there more wrong? Apologies if my joke came off sounding serious. I don't have a spare.

Did you get the roll pin out of the lockout knob ok?