BP3D competition, on our way to the championship - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

puma · 08-25-2015, 10:14 AM

On our quest for the Super Production Challenge championship, we managed to get two 3rd place at the Ted Powell Memorial weekend at Calabogie Motosport Park in Ontario.

Both front runners were way too fast for our young developped car so we had no chance to catch them up but third place was on target and we achieved it on this one hour race which was split in 2 at the mid portion.

We are currently leading the championship with 1067 points compared to 967 for the second. We were able to finish all our races which wasn't the case for our closer opponents, sometimes to win a championship you must first finish and this is what we did really well this season. There is one weekend left in october and we hope to do well to be crowned champion.

We would like to thank Perry Performance for it's support as well as Racecomp Engineering and Essex/Ap Racing.

philooo · 08-25-2015, 10:39 AM

this is one of the best looking track FRS. simple and so clean ! especially when I know how clean it is inside out

nice job !

I did not see you updating us on your new brake system ? last time I checked I thought you were on the stock caliper ? what pads are you running, I see that you have no brake ducts ? do you know what temp the pads are reaching ?

puma · 08-25-2015, 10:45 AM

you can see pics of our brake setup on our build thread but basically, we are using AP racing sprint kit, we never bothered trying to use the stock calipers.

http://www.ft86club.com/forums/showt...3d+competition

We are running on really cheap tires so we didn't need any ducting, we tried hp+ at first because it did wonder on our RSX with those tires but it was really not enough with our custom brake bias setup. We are now using Hawk DTC60 but we have a set of Ferrodo waiting to be tried with a new set of bedded rotors directly from Essex. We'll see if it's better.

philooo · 08-25-2015, 11:22 AM

good to know about the DTC60

arghh bedded rotors ! I wish I had known about that when I bought my kit... these are really hard to bed on the track, because they keep the temperature so low.

next time I'll definitely buy a bedded set of rotors!

08-25-2015, 10:14 AM	#1
puma crew chief Join Date: Mar 2014 Drives: Race car FR-S Location: Quebec Posts: 378 Thanks: 6 Thanked 189 Times in 82 Posts Mentioned: 14 Post(s) Tagged: 0 Thread(s)	BP3D competition, on our way to the championship On our quest for the Super Production Challenge championship, we managed to get two 3rd place at the Ted Powell Memorial weekend at Calabogie Motosport Park in Ontario. Both front runners were way too fast for our young developped car so we had no chance to catch them up but third place was on target and we achieved it on this one hour race which was split in 2 at the mid portion. We are currently leading the championship with 1067 points compared to 967 for the second. We were able to finish all our races which wasn't the case for our closer opponents, sometimes to win a championship you must first finish and this is what we did really well this season. There is one weekend left in october and we hope to do well to be crowned champion. We would like to thank Perry Performance for it's support as well as Racecomp Engineering and Essex/Ap Racing.

08-25-2015, 10:39 AM	#2
philooo Senior Member Join Date: Mar 2014 Drives: 13' Scion FRS Track car Location: miami Posts: 417 Thanks: 76 Thanked 107 Times in 84 Posts Mentioned: 7 Post(s) Tagged: 2 Thread(s)	this is one of the best looking track FRS. simple and so clean ! especially when I know how clean it is inside out nice job ! I did not see you updating us on your new brake system ? last time I checked I thought you were on the stock caliper ? what pads are you running, I see that you have no brake ducts ? do you know what temp the pads are reaching ? __________________ 2013 Scion Frs Track Car - Sold.

08-25-2015, 11:22 AM	#4
philooo Senior Member Join Date: Mar 2014 Drives: 13' Scion FRS Track car Location: miami Posts: 417 Thanks: 76 Thanked 107 Times in 84 Posts Mentioned: 7 Post(s) Tagged: 2 Thread(s)	good to know about the DTC60 arghh bedded rotors ! I wish I had known about that when I bought my kit... these are really hard to bed on the track, because they keep the temperature so low. next time I'll definitely buy a bedded set of rotors! __________________ 2013 Scion Frs Track Car - Sold.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
BP3D Competition FRS race car	puma	Member's Car Journals	60	02-13-2017 09:12 PM
2 more podiums for BP3D competition	puma	Scion FR-S / Toyota 86 GT86 General Forum	1	08-27-2015 11:39 AM
BP3D Competition did it again, 3 new podiums	puma	Tracking / Autocross / HPDE / Drifting	18	07-14-2015 10:48 PM
First win for BP3D Competition	puma	Scion FR-S / Toyota 86 GT86 General Forum	1	06-29-2015 02:08 PM
First win for BP3D Competition	puma	Tracking / Autocross / HPDE / Drifting	2	06-29-2015 11:16 AM

08-25-2015, 10:45 AM	#3
puma crew chief Join Date: Mar 2014 Drives: Race car FR-S Location: Quebec Posts: 378 Thanks: 6 Thanked 189 Times in 82 Posts Mentioned: 14 Post(s) Tagged: 0 Thread(s)	you can see pics of our brake setup on our build thread but basically, we are using AP racing sprint kit, we never bothered trying to use the stock calipers. http://www.ft86club.com/forums/showt...3d+competition We are running on really cheap tires so we didn't need any ducting, we tried hp+ at first because it did wonder on our RSX with those tires but it was really not enough with our custom brake bias setup. We are now using Hawk DTC60 but we have a set of Ferrodo waiting to be tried with a new set of bedded rotors directly from Essex. We'll see if it's better.

User Name		Remember Me?
Password