EL Headers w/ Axle Back

[Nigori]

Anyone got a sound clip of what equal length headers with an axle back sounds like?

[weederr33]

Originally Posted by Nigori

Anyone got a sound clip of what equal length headers with an axle back sounds like?

I recently put the stock front pipe back on. But sounds nearly the same.

[bfrank1972]

P&L EL catted + Greddy SP Elite axle back. The rest stock.

Sent from my SM-G965U using Tapatalk

[M0nk3y]

It's not much, pretty tame setup

JDL 4-2-1, JDL FP/OP Catted Ultra Quiet, 2.5" Perrin Resonated Exhaust

In car, mic at license plate:

[JBezugs]

I'll chime in w/ my setup!

JDL 4-2-1 Header, Stock OP/FP, Invidia R400.

[Danny318]

Please indicate with or without cat it makes a huge difference

Is there a muffler that is on the quieter side when using uncatted headers?

[weederr33]

Originally Posted by Danny318

Please indicate with or without cat it makes a huge difference

Is there a muffler that is on the quieter side when using uncatted headers?

No.

[Danny318]

Originally Posted by weederr33

No.

Do you think adding a round style muffler ( like a flow master Dbx or similar) in place of the stock resonator would lower the volume on some of these axle back systems? Do those round style mufflers do much at all ?

[weederr33]

Originally Posted by Danny318

Do you think adding a round style muffler ( like a flow master Dbx or similar) in place of the stock resonator would lower the volume on some of these axle back systems? Do those round style mufflers do much at all ?

It depends. Noise can be subjective. Even though I have the TRD axelback, certain RPMs and throttle input makes it louder than my HKS was with a full exhaust set up. If you want it quiet, you'll need a pretty big muffler. And that means weight. The round, straight throughs are going to be louder generally.