What Redline/Fuel Cut Off You Running - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Dezoris · 06-04-2014, 01:59 AM

I am testing out new tuning, and my previous tune maintained stock fuel cut off at 7450. The new tuning is quite the change but also has a higher fuel cut I believe at 7800.

Since I am Mr. Conservative, today I was driving bit hard in first hit 7700RPM and almost sh*t my pants.

Whats your feeling about what fuel cut off and what to set it at?

D K · 06-04-2014, 02:22 AM

I'm not even joking: I'm running 6500 until we get everything working

CSG Mike · 06-04-2014, 02:24 AM

Do you have any headwork done? If not, I HIGHLY recommend u drop the redline.

SmsAlSuwaidi · 06-04-2014, 02:24 AM

i hit 7800 a lot... i know that power isn't being made after 7000, but it makes me drop back in my sweet spot of the turbo. Regarding cuts i would love a harsh cut to actually throw flames/bangs ( no im not kidding), but ive been told Ecutek doesn't have the choices of running both cuts (fuel+ ignition together or something in that context )

rb6freak · 06-04-2014, 02:49 AM

7700 because I need a longer 2nd gear on the track. Street driving I shift 6500-7000.

CSG Mike · 06-04-2014, 03:02 AM

Quote:

Originally Posted by rb6freak

7700 because I need a longer 2nd gear on the track. Street driving I shift 6500-7000.

Your 2nd gear is useable on track?

I'd love to see your car in action.

rb6freak · 06-04-2014, 03:06 AM

Quote:

Originally Posted by CSG Mike

Your 2nd gear is useable on track?

I'd love to see your car in action.

August 30th, you'll be in the driver seat.

I was referring to smaller kart tracks and autocross.

HRTROB · 06-04-2014, 05:48 AM

Mine is set at 8,000rpm but I rarely rev it that high. But when I do, man it pulls like a mofo.

Since I have a SC the power continues to climb past 7,5k rpm. It's a 25whp increase at 8,000rpm from 7,500rpm

D K · 06-04-2014, 06:30 AM

Why not run a smaller pulley and shift sooner?

Quote:

Originally Posted by HRTROB

Mine is set at 8,000rpm but I rarely rev it that high. But when I do, man it pulls like a mofo.

Since I have a SC the power continues to climb past 7,5k rpm. It's a 25whp increase at 8,000rpm from 7,500rpm

buddy32 · 06-04-2014, 07:56 AM

Quote:

Originally Posted by rb6freak

August 30th, you'll be in the driver seat.

I was referring to smaller kart tracks and autocross.

Can't wait to see this!!

King Tut · 06-04-2014, 11:09 AM

Mine was set to 8000 RPM on both my Visconti and FA20Club tunes, and I had no fears of reving it to that to maximize the hump in my horsepower curve:

sw20kosh · 06-04-2014, 12:08 PM

Quote:

Originally Posted by King Tut

Mine was set to 8000 RPM on both my Visconti and FA20Club tunes, and I had no fears of reving it to that to maximize the hump in my horsepower curve:

You don't need to rev to 8k to maximize your torque curve ... Your curve is so broad... James doesn't think I need to raise my limiter and my turbo spools slower than yours

bakerr6 · 06-04-2014, 12:34 PM

mine will probably be set at 6800-7k. I'm conservative when it comes to pushing the stock motor past its limits. In a few years when I no longer dd the car, I'll drop in a built motor and push it much higher

xwd · 06-04-2014, 01:10 PM

With the turbo I'm looking to put in a 3.91 FD so I won't have to wind out 2nd gear so much in autocross. I plan on running 7800RPM as the redline, but will be tapering boost a bit above 6800 just to keep stress off the engine.

06-04-2014, 01:59 AM	#1
Dezoris Senior Member Join Date: Aug 2012 Drives: FR-S Location: IL Posts: 2,857 Thanks: 519 Thanked 2,998 Times in 1,095 Posts Mentioned: 159 Post(s) Tagged: 1 Thread(s)	What Redline/Fuel Cut Off You Running I am testing out new tuning, and my previous tune maintained stock fuel cut off at 7450. The new tuning is quite the change but also has a higher fuel cut I believe at 7800. Since I am Mr. Conservative, today I was driving bit hard in first hit 7700RPM and almost sht my pants. Whats your feeling about what fuel cut off and what to set it at? __________________ SAVAGEGEESE*

06-04-2014, 02:24 AM	#4
SmsAlSuwaidi Boosted Join Date: Feb 2013 Drives: Not a supra....yet Location: Riverside,CA/ Abu Dhabi,UAE Posts: 2,925 Thanks: 487 Thanked 1,203 Times in 812 Posts Mentioned: 90 Post(s) Tagged: 2 Thread(s)	i hit 7800 a lot... i know that power isn't being made after 7000, but it makes me drop back in my sweet spot of the turbo. Regarding cuts i would love a harsh cut to actually throw flames/bangs ( no im not kidding), but ive been told Ecutek doesn't have the choices of running both cuts (fuel+ ignition together or something in that context ) __________________ https://www.facebook.com/Smsalsuwaidiracing/

06-04-2014, 02:49 AM	#5
rb6freak Senior Member Join Date: Nov 2013 Drives: 23 BRZ Location: CA Posts: 540 Thanks: 546 Thanked 688 Times in 300 Posts Mentioned: 33 Post(s) Tagged: 0 Thread(s)	7700 because I need a longer 2nd gear on the track. Street driving I shift 6500-7000. __________________ SecondGen \| FirstGen \| Instagram \| YouTube

06-04-2014, 11:09 AM	#11
King Tut NASA SpecE30 Racer Join Date: May 2012 Drives: 2006 Honda S2000 Location: Gulf Breeze, FL Posts: 7,279 Thanks: 607 Thanked 5,759 Times in 3,055 Posts Mentioned: 274 Post(s) Tagged: 10 Thread(s)	Mine was set to 8000 RPM on both my Visconti and FA20Club tunes, and I had no fears of reving it to that to maximize the hump in my horsepower curve: __________________ - King Tut Street/Track Car: 2006 Honda S2000 TT3 \|\| Race Car: 1987 BMW 325is SpecE30 \|\| Tow Vehicle: 2014 RAM 1500 EcoDiesel Sold Cars: 2012 BMW M3 \|\| 2013 Subaru BRZ \|\| 2012 Porsche Cayman R \|\| 2009 Chevrolet Z06 \|\| 2009 BMW M3 \|\| 2004 BMW M3 \|\| 2004 Nissan 350Z

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fuel pump running when the car is off?	Target70	Scion FR-S / Toyota 86 GT86 General Forum	12	03-25-2014 06:32 PM
FuelLog (Android) App:~10k miles of MPG, Range, Fuel Prices, Fuel Qty, Etc.	MmmDieselFumes	Scion FR-S / Toyota 86 GT86 General Forum	28	02-02-2014 09:19 PM
Electric fuel pump running with car off???	bpracer	Issues \| Warranty \| Recalls / TSB	13	08-08-2013 10:42 AM
CEL after running out of fuel	Kido1986	Issues \| Warranty \| Recalls / TSB	10	02-11-2013 01:34 PM
Dynosty FR-S/BRZ Fuel System Upgrades! Deatschwerks DW65C Fuel Pump	Dustin@Dynosty	Engine, Exhaust, Bolt-Ons	3	08-21-2012 05:53 PM

06-04-2014, 02:22 AM	#2
D K Stig's dark passenger Join Date: Dec 2013 Drives: FR-S Location: I work abroad Posts: 724 Thanks: 60 Thanked 316 Times in 186 Posts Mentioned: 20 Post(s) Tagged: 1 Thread(s)	I'm not even joking: I'm running 6500 until we get everything working

06-04-2014, 02:24 AM	#3
CSG Mike Join Date: Jul 2012 Drives: S2000 CR Location: Orange County Posts: 14,562 Thanks: 8,942 Thanked 14,211 Times in 6,854 Posts Mentioned: 970 Post(s) Tagged: 14 Thread(s)	Do you have any headwork done? If not, I HIGHLY recommend u drop the redline.

06-04-2014, 05:48 AM	#8
HRTROB Senior Member Join Date: Dec 2012 Drives: Toyota 86 Location: Manila, Philippines Posts: 458 Thanks: 144 Thanked 271 Times in 140 Posts Mentioned: 13 Post(s) Tagged: 0 Thread(s)	Mine is set at 8,000rpm but I rarely rev it that high. But when I do, man it pulls like a mofo. Since I have a SC the power continues to climb past 7,5k rpm. It's a 25whp increase at 8,000rpm from 7,500rpm

06-04-2014, 12:34 PM	#13
bakerr6 Senior Member Join Date: Jun 2012 Drives: 2013 raven black fr-s Location: cincinnati, oh Posts: 1,447 Thanks: 503 Thanked 443 Times in 305 Posts Mentioned: 3 Post(s) Tagged: 0 Thread(s)	mine will probably be set at 6800-7k. I'm conservative when it comes to pushing the stock motor past its limits. In a few years when I no longer dd the car, I'll drop in a built motor and push it much higher

06-04-2014, 01:10 PM	#14
xwd Senior Member Join Date: Feb 2012 Drives: 2013 DGM Subaru BRZ (Subie #9) Location: ATL, US Posts: 2,667 Thanks: 123 Thanked 861 Times in 552 Posts Mentioned: 32 Post(s) Tagged: 0 Thread(s)	With the turbo I'm looking to put in a 3.91 FD so I won't have to wind out 2nd gear so much in autocross. I plan on running 7800RPM as the redline, but will be tapering boost a bit above 6800 just to keep stress off the engine.

User Name		Remember Me?
Password