Wheel Directory: Bremmer Kraft BR10 18x9.0 +42

[djdnz]

Here's my BRZ, it has Bremmer Kraft BR10 18x9+42 wheels. Tires are Continental ExtremeContactDW 245/35/18, coilover suspension 1.25" with RCE Tarmac T-Zero coilovers

10/15 Two new pics



09/04 Update
Since someone asked, this is the only other pic I've taken so far


08/19 Update:
Cellphone pics:




06/20/2013
Original Post:

I received my wheels yesterday and only got a chance to quickly test fit one front wheel tonight. I will get some more pics next week. We have already seen it on the rears in another thread, but I will be running a 18x9+42 square.

Specs:
Bremmer Kraft BR10 18x9+42 w/ 245/35/18 Continental DW ExtremeContact
Stock height for now, waiting on Tarmac Zeroes to arrive

I just put the car back on the ground after being jacked up, so it's sitting a little high I think. The car is also on a slanted driveway. It's currently poking about 10mm, I think lowering 1" will make it nice. I'm thinking the rear will need a 5mm spacer to bring it to flush at that height. The tires are a bit more stretched than I would have liked, but I wanted to avoid adding any more unnecessary weight. I think 255's would be a bit nicer on the eyes, and the Continentals don't help much based on their shape.







I have checked for rubbing, it is VERY close to the stock spring perch but it clears by 2-3mm, have tried rotating the wheel left to right, no additional issues. It's a bit too close for my comfort level so I'm not sure if I will mount them permanently until I get the coils on.

Strut Clearance
Top, wheel straight:


Turned Hard Left


Turned Hard Right

[sprintertrueno86]

You have pics of the whole car with wheels on? Lookin good so far.

[Mad_Mike]

Love the wheels. Waiting for more pics.

[hanabie]

Many thanks for that front pic.. it helps alot!

Sent from my SGH-T999 using Tapatalk 4 Beta

[The Racers Line]

Damnit, that means there's no way these are going to fit with any drop+camber without a spacer

[hanabie]

Originally Posted by Calidownhiller

Damnit, that means there's no way these are going to fit with any drop+camber without a spacer

you could only do it 18x8 front.

I thought adding negative chamber would definitely hit the front strut.

[joergasm]

Originally Posted by hanabie

you could only do it 18x8 front.

I thought adding negative chamber would definitely hit the front strut.

That's what I was scared of so I did the staggered way, but I also like the staggered look haha. So win-win.

I have them but have not check lmao but the 18x9 at back has the same clearance/distance from the strut right?

[joergasm]

Hope your liking the wheels dude, glad I was able to help you decide on them!

[hanabie]

Originally Posted by joergasm

That's what I was scared of so I did the staggered way, but I also like the staggered look haha. So win-win.

I have them but have not check lmao but the 18x9 at back has the same clearance/distance from the strut right?

Reason is, the wheels at the back are fixed. They don't make hard corner turns just like your front.

Now, how is the wheels quality so far?

[djdnz]

Originally Posted by Calidownhiller

Damnit, that means there's no way these are going to fit with any drop+camber without a spacer

Pretty much what I'm thinking. As I said in joergasm's thread, I think you'd have to remove camber if you drop with springs and don't want spacers. You might be able to make it work though... hard to say for sure without trying.

Originally Posted by hanabie

Many thanks for that front pic.. it helps alot!

Sent from my SGH-T999 using Tapatalk 4 Beta

No problem, more to follow - hopefully this week, coilovers should arrive tonight or tomorrow

Originally Posted by Mad_Mike

Love the wheels. Waiting for more pics.

Originally Posted by joergasm

That's what I was scared of so I did the staggered way, but I also like the staggered look haha. So win-win.

I have them but have not check lmao but the 18x9 at back has the same clearance/distance from the strut right?

Yeah the fronts are very close, if you're not going coilovers I think you made the wise choice. The rears should be no issue at all.

Originally Posted by joergasm

Hope your liking the wheels dude, glad I was able to help you decide on them!

Yeah thanks for the pics you posted, I wasn't too sure about them since I haven't read much about the brand, but pretty happy with them (sitting on my garage floor anyway lol)

[bjun]

So 18x9 fits the front with 245 tires?
Do you suggest any camber/spacers?

[djdnz]

Originally Posted by bjun

So 18x9 fits the front with 245 tires?
Do you suggest any camber/spacers?

Since your signature says you have KW V3's, there is no issue with clearance. Spacers are not required when you have coilovers. Camber is your preference, but there should be lots of room for camber adjustment.

[bjun]

Ya I got the coils n wheels. Just need tires but every discount tires I go to denies me service bc their computer says 18x9 won't fit the front =/

[DarrenDriven]

Added to the Wheel Directory:
http://tinyurl.com/86wheels