sold - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

sw20kosh · 12-06-2013, 02:25 AM

Up for sale is an Innovate Twin Screw kit with intercooler system. This is a bolt up and go package. $2900 shipped

Supercharger kit:

Either 75 or 70mm pulley (your choice or get both for an added charge)
Tapped for a water/meth nozzle (if you decide to spray meth down the road)
Replaced supercharger gear oil with fresh oil
8k miles on components

The intercooler system is an FA20club increased capacity system:

larger front mount heat exchanger
larger (3x) capacity reservoir
compatible with ice for getting the water temps down at the track
1k miles on components
laminova intercooler core is already installed into the manifold with coolant pipes attached and sealed.

Optional Items:

FA20club Intake Air Temperature Relocation Kit (monitor the temperature post blower instead of pre-blower. Your tuner can adjust timing and fueling compensation tables based on IAT) $90
both pulleys instead of one(75 and 70 mm) $40
Perrin CAI which looks awesome with this kit, improves airflow to blower, and amplifies the supercharger scream like crazy!

Dwood11 · 12-06-2013, 12:15 PM

Why the sale? How much power did you make on the dyno? Thanks.

boombacloud · 12-06-2013, 12:18 PM

Interested. What's your reason for selling if you don't mind me asking? And how much for the Perrin CAI?

C130NAV · 12-06-2013, 12:42 PM

Where you located and why are you selling it? What was your end WHP?

sw20kosh · 12-06-2013, 12:58 PM

Quote:

Originally Posted by C130NAV

Where you located and why are you selling it? What was your end WHP?

Quote:

Originally Posted by Dwood11

Why the sale? *How much power did you make on the dyno? *Thanks.

Quote:

Originally Posted by boombacloud

Interested. *What's your reason for selling if you don't mind me asking? And how much for the Perrin CAI?

Bay Area Ca.

230's whp intercooled conservative n safe first pass tune. Tuner said there is room to go.

240-244 whp non intercooled but with water/meth injection.

Time for something new. My ADD is kicking in. Big turbo or selling to buy a new car.

Perrin CAI $250 shipped

mit_peid · 12-06-2013, 01:32 PM

I want to know if ALL parts will be included that came from Innovate (bolts, clamps, gaskets, belts, etc.). It would also be useful if you could itemize everything that would be included.

Also, it looks like it is not the I/C that is being included with the Innovate kit. How is the FA20club I/C different than the one that Innovate is including and will this impact Innovate's CARB approval status at all?

sw20kosh · 12-06-2013, 02:11 PM

Quote:

Originally Posted by mit_peid

I want to know if ALL parts will be included that came from Innovate.

How is the FA20club I/C different than the one that Innovate is including and will this impact Innovate's CARB approval status at all?

Look here for an itemization. ALL parts, hoses, clamps, gasgets etc in the kit will be included as I would have no use for them. Keep in mind this kit uses a lot of clamps/hoses etc from your stock engine. See Page 7 and 8:

http://www.innovatemotorsports.com/s...T86_Manual.pdf

I will label each hose with an identification so you know where it needs to go etc.

As for the intercooler. I stated how it is different in the OP. Look here for more info:

http://www.fa20club.com/product.php?productid=18372

As for CARB. Since the FA20club kit uses the same Laminova Intercooler Core (the actual intercooler that sits in the intake path) and Core Fittings as the Innovate/Sprintex kit uses, there is no reason it would be deemed illegal. No one would even be able to tell the difference.

Hope that helps.

tech4pdx · 12-06-2013, 04:55 PM

I want the IAT relocation kit! Will it come with everything as sold by FA20Club?

swift996 · 12-06-2013, 05:40 PM

Man, what a steal. I wish I waited! I plan to upgrade to the intercooler here soon and been eyeing some Cadillac CTS-Vs as an addition. I figure my quest for power can end there and my BRZ will be the fun/light sports car!

Mr.Jay · 12-06-2013, 05:52 PM

damn good price

GLWS

BRZPDX · 12-06-2013, 08:17 PM

@stockysnail

NorCal_Guy · 12-07-2013, 12:12 AM

Bump for a great guy

akuhei · 12-07-2013, 12:41 AM

Really...really want to buy this..its just a bad time for me to make the purchase. :-( GLWS

Sent from my Nexus 7 using Tapatalk

swift996 · 01-06-2014, 04:31 PM

Did you sell the IAT kit with this?

12-06-2013, 02:25 AM	#1
sw20kosh Senior Member Join Date: Jul 2012 Drives: 2013 Black FR-S Location: SF Posts: 3,030 Thanks: 881 Thanked 2,014 Times in 990 Posts Mentioned: 153 Post(s) Tagged: 1 Thread(s)	sold Up for sale is an Innovate Twin Screw kit with intercooler system. This is a bolt up and go package. $2900 shipped Supercharger kit: Either 75 or 70mm pulley (your choice or get both for an added charge) Tapped for a water/meth nozzle (if you decide to spray meth down the road) Replaced supercharger gear oil with fresh oil 8k miles on components The intercooler system is an FA20club increased capacity system: larger front mount heat exchanger larger (3x) capacity reservoir compatible with ice for getting the water temps down at the track 1k miles on components laminova intercooler core is already installed into the manifold with coolant pipes attached and sealed. Optional Items: FA20club Intake Air Temperature Relocation Kit (monitor the temperature post blower instead of pre-blower. Your tuner can adjust timing and fueling compensation tables based on IAT) $90 both pulleys instead of one(75 and 70 mm) $40 Perrin CAI which looks awesome with this kit, improves airflow to blower, and amplifies the supercharger scream like crazy! Last edited by sw20kosh; 12-07-2013 at 04:49 AM.

12-06-2013, 01:32 PM	#6
mit_peid Boosted Noob Join Date: Nov 2012 Drives: '13 FRS MT KW SC, '05 4Runner 4WD Location: SoCal Posts: 883 Thanks: 353 Thanked 343 Times in 175 Posts Mentioned: 7 Post(s) Tagged: 0 Thread(s)	I want to know if ALL parts will be included that came from Innovate (bolts, clamps, gaskets, belts, etc.). It would also be useful if you could itemize everything that would be included. Also, it looks like it is not the I/C that is being included with the Innovate kit. How is the FA20club I/C different than the one that Innovate is including and will this impact Innovate's CARB approval status at all? __________________

12-06-2013, 05:40 PM	#9
swift996 Senior Member Join Date: Nov 2011 Drives: Subaru BRZ Limited 6MT Location: Winston-Salem, NC Posts: 2,432 Thanks: 712 Thanked 955 Times in 545 Posts Mentioned: 47 Post(s) Tagged: 0 Thread(s)	Man, what a steal. I wish I waited! I plan to upgrade to the intercooler here soon and been eyeing some Cadillac CTS-Vs as an addition. I figure my quest for power can end there and my BRZ will be the fun/light sports car! __________________ Innovate Supercharged Black Limited BRZ 6-Speed MT(Build Thread) 2010 Cadillac CTS-V Sedan M6 w/550whp (Build Thread)

12-06-2013, 05:52 PM	#10
Mr.Jay Senior Member Join Date: Mar 2011 Drives: FRS :D Location: Vancouver BC Posts: 2,985 Thanks: 545 Thanked 699 Times in 438 Posts Mentioned: 18 Post(s) Tagged: 0 Thread(s)	damn good price GLWS __________________ Out of the FRS game

12-07-2013, 12:41 AM	#13
akuhei Senior Member Join Date: Sep 2012 Drives: Raven M/T FR-S Location: Acworth, GA Posts: 662 Thanks: 711 Thanked 257 Times in 154 Posts Mentioned: 31 Post(s) Tagged: 0 Thread(s)	Really...really want to buy this..its just a bad time for me to make the purchase. :-( GLWS Sent from my Nexus 7 using Tapatalk __________________ Akuhei's Blog "Inconceivable"

12-06-2013, 12:15 PM	#2
Dwood11 Senior Member Join Date: Nov 2013 Drives: 2014 SWP BRZ LIMITED Location: So Cal Posts: 127 Thanks: 5 Thanked 41 Times in 22 Posts Mentioned: 3 Post(s) Tagged: 0 Thread(s)	Why the sale? How much power did you make on the dyno? Thanks.

12-06-2013, 12:18 PM	#3
boombacloud Yuengling Join Date: Aug 2012 Drives: old & busted Location: Lewisville, TX Posts: 13 Thanks: 0 Thanked 1 Time in 1 Post Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Interested. What's your reason for selling if you don't mind me asking? And how much for the Perrin CAI?

12-06-2013, 12:42 PM	#4
C130NAV Senior Member Join Date: Dec 2013 Drives: Whiteout 6Sp FR-S Location: East Boston Posts: 320 Thanks: 81 Thanked 80 Times in 60 Posts Mentioned: 7 Post(s) Tagged: 0 Thread(s)	Where you located and why are you selling it? What was your end WHP?

12-06-2013, 04:55 PM	#8
tech4pdx Make love Join Date: Nov 2012 Drives: H8R.. Not really Location: Edge of the Milky Way Posts: 780 Thanks: 524 Thanked 214 Times in 143 Posts Mentioned: 31 Post(s) Tagged: 0 Thread(s)	I want the IAT relocation kit! Will it come with everything as sold by FA20Club?

12-07-2013, 12:12 AM	#12
NorCal_Guy It's turbo time! Join Date: May 2013 Drives: 2013 Scion FRS Location: Nor Cal Posts: 1,246 Thanks: 615 Thanked 216 Times in 164 Posts Mentioned: 31 Post(s) Tagged: 0 Thread(s)	Bump for a great guy

01-06-2014, 04:31 PM	#14
swift996 Senior Member Join Date: Nov 2011 Drives: Subaru BRZ Limited 6MT Location: Winston-Salem, NC Posts: 2,432 Thanks: 712 Thanked 955 Times in 545 Posts Mentioned: 47 Post(s) Tagged: 0 Thread(s)	Did you sell the IAT kit with this? __________________ Innovate Supercharged Black Limited BRZ 6-Speed MT(Build Thread) 2010 Cadillac CTS-V Sedan M6 w/550whp (Build Thread)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
oil cooler for innovate supercharger	Benn0r	Forced Induction	15	11-11-2015 11:09 AM
Innovate Supercharger!!!	Titanmotorsports	Forced Induction	62	08-24-2014 11:25 PM
FS: Innovate Supercharger kit WITH the innercooler	alexisfire02	Engine, Exhaust, Bolt-Ons	29	11-21-2013 11:39 PM
Non intercooled supercharger kits	Moe	AFRICA	2	10-30-2013 11:43 AM
p000d CEL+Innovate supercharger	MattF	Forced Induction	13	08-16-2013 01:22 AM

User Name		Remember Me?
Password