Offset for rocket bunny? - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

INFINITYZII · 10-31-2015, 01:53 PM

Hi guys. i saw a lot of thread about rocket bunny but im still not sure if offset +40 will be fine on RB and will spacers help? Or offset has to be lower than something offset? thanks.

kch · 10-31-2015, 02:44 PM

Quote:

Originally Posted by INFINITYZII

Hi guys. i saw a lot of thread about rocket bunny but im still not sure if offset +40 will be fine on RB and will spacers help? Or offset has to be lower than something offset? thanks.

+40 is like...nothing. You'll need HUGE spacers or a MUCH lower offset. Or both. Probably into the negatives.

You have a lot of research to do, and this has been discussed before. Try looking here first.

INFINITYZII · 10-31-2015, 04:48 PM

Quote:

Originally Posted by kch

+40 is like...nothing. You'll need HUGE spacers or a MUCH lower offset. Or both. Probably into the negatives.

You have a lot of research to do, and this has been discussed before. Try looking here first.

Thanks bro. I want to go for te37 but i might have to convert 5x100 to 5x114.3.

INFINITYZII · 10-31-2015, 04:50 PM

Quote:

Originally Posted by kch

+40 is like...nothing. You'll need HUGE spacers or a MUCH lower offset. Or both. Probably into the negatives.

You have a lot of research to do, and this has been discussed before. Try looking here first.

18x9.5 +22 will work right? with spacers?

HachiRo · 10-31-2015, 05:15 PM

Quote:

Originally Posted by INFINITYZII

18x9.5 +22 will work right? with spacers?

Based on the width of the wheel alongside the offset, not purely offset.
On average, in front you can run a 9.5 with for example 18x9.5 -5 offset and the rears will require something like 18x10.5 -35 to -40 if you want it flush.
+22 in front will look ok, sunk in, but okay. In the rear it's going to be terribly sunken in.

HachiRo · 10-31-2015, 05:18 PM

Also, for Rocket Bunny it's recommended you get 2 or 3 piece wheels and not cheap replicas with low offsets. For one, the offset won't be low enough and also, you're going to be running a spacer, maybe even 2 spacers to get a good effective offset.
If you have to, Varrstoen makes their ES2 special ordered in 0 offset in which you can technically run a 35-40mm spacer in the rear and whatever spacer in front of you want flushness or poke.
Other than that, look into custom offset wheels. The cheapest being Forgestar F14s seen on many of the early Rocket Bunnies.

adamg · 10-31-2015, 05:59 PM

Quote:

Originally Posted by INFINITYZII

Hi guys. i saw a lot of thread about rocket bunny but im still not sure if offset +40 will be fine on RB and will spacers help? Or offset has to be lower than something offset? thanks.

you never said what size wheels..

sounds like you have no clue what your doing

TylerLieberman · 11-01-2015, 02:03 PM

Quote:

Originally Posted by adamg

you never said what size wheels..

sounds like you have no clue what your doing

Lol. So true.

Aren't there like 30 threads on this forum alone where this exact topic has already been covered? Damn, people are so f*cking lazy these days.

Holy shit. Check this out. Took me 15 seconds to type it into google and all of these results came up.. On this very forum too.

https://www.google.com/#q=rocket+bun...w.ft86club.com

EAGLE5 · 11-01-2015, 02:06 PM

Quote:

Originally Posted by TylerLieberman

Lol. So true.

Aren't there like 30 threads on this forum alone where this exact topic has already been covered? This is part of why our society is going to shit. Instead of spending an hour of their own time doing the work and researching the info and answers that are already out there, they'd rather ask and wait for a week hoping somebody else just answers the question for them.

Holy shit. Check this out. Took me 15 seconds to type it into google and all of these results came up.. On this very forum too.

https://www.google.com/#q=rocket+bun...w.ft86club.com

Yes, our society i going to crap because people won't do their own searches. I wholeheartedly agree. I think we should buy more guns.

Leonardo · 11-01-2015, 02:21 PM

It's like an unwritten rule. Your first few posts you gotta post rocket bunny coming! Or which turbo should I go with to get 500hp. Or I can't decide between custom works or custom dpe wheels, please vote.

TylerLieberman · 11-01-2015, 02:29 PM

Quote:

Originally Posted by jsimon7777

Yes, our society i going to crap because people won't do their own searches. I wholeheartedly agree. I think we should buy more guns.

??

slicktop · 11-02-2015, 02:38 PM

If you go with a Rocket Bunny kit, for gods sake don't run spacers.

solus · 11-03-2015, 06:17 PM

So...

will

18"
Front 9.5" Rear 10.5"
Offset Front -34Rear -46

fit with V1 fenders, max -2 camber and 255/35/18 up front and 275s in the back?

evomike · 11-04-2015, 08:33 AM

Quote:

Originally Posted by solus

So...

will

18"
Front 9.5" Rear 10.5"
Offset Front -34Rear -46

fit with V1 fenders, max -2 camber and 255/35/18 up front and 275s in the back?

you may have an issue with the camber you want to run

10-31-2015, 01:53 PM	#1
INFINITYZII Junior Member Join Date: Oct 2015 Drives: frs Location: virginia Posts: 4 Thanks: 0 Thanked 0 Times in 0 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Offset for rocket bunny? Hi guys. i saw a lot of thread about rocket bunny but im still not sure if offset +40 will be fine on RB and will spacers help? Or offset has to be lower than something offset? thanks.

10-31-2015, 05:18 PM	#6
HachiRo Senior Member Join Date: Aug 2014 Drives: 2013 White-Out FRS Location: San Jose, CA Posts: 697 Thanks: 243 Thanked 211 Times in 142 Posts Mentioned: 9 Post(s) Tagged: 0 Thread(s)	Also, for Rocket Bunny it's recommended you get 2 or 3 piece wheels and not cheap replicas with low offsets. For one, the offset won't be low enough and also, you're going to be running a spacer, maybe even 2 spacers to get a good effective offset. If you have to, Varrstoen makes their ES2 special ordered in 0 offset in which you can technically run a 35-40mm spacer in the rear and whatever spacer in front of you want flushness or poke. Other than that, look into custom offset wheels. The cheapest being Forgestar F14s seen on many of the early Rocket Bunnies. __________________ I live my life one quarter-pounder at a time.

11-02-2015, 02:38 PM	#12
slicktop Senior Member Join Date: Mar 2013 Drives: 2013 Raven FRS 2JZ-GTE/V160 swapped Location: Hampton, VA Posts: 960 Thanks: 376 Thanked 623 Times in 315 Posts Mentioned: 18 Post(s) Tagged: 0 Thread(s)	If you go with a Rocket Bunny kit, for gods sake don't run spacers. __________________ -slicktop 2013 Scion FRS 2JZ-GTE/V160 Swap Build Thread

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
My Rocket Bunny V2 FRS	cdlc	FR-S & 86 Photos, Videos, Wallpapers, Gallery Forum	20	11-11-2014 05:31 PM
Rocket bunny style DRL without the rocket bunny kit.	ducky369	Cosmetic Modification (Interior/Exterior/Lighting)	0	09-22-2014 06:38 PM
Vis rocket bunny kit	FrsT86-671	Cosmetic Modification (Interior/Exterior/Lighting)	3	04-27-2014 09:33 AM
Rocket Bunny kit (just lip)	encity5	Cosmetic Modification (Interior/Exterior/Lighting)	8	11-01-2013 10:01 PM
Rocket Bunny ver.2 kit	SnapOv3st3r	FR-S & 86 Photos, Videos, Wallpapers, Gallery Forum	9	08-19-2013 07:29 PM

11-01-2015, 02:21 PM	#10
Leonardo Country Boy 4 Life Join Date: Jul 2012 Drives: 19' & 06' Ridgelines, 13' FR-S Location: EUGENE Posts: 5,228 Thanks: 6,719 Thanked 5,293 Times in 2,720 Posts Mentioned: 47 Post(s) Tagged: 1 Thread(s)	It's like an unwritten rule. Your first few posts you gotta post rocket bunny coming! Or which turbo should I go with to get 500hp. Or I can't decide between custom works or custom dpe wheels, please vote.

11-03-2015, 06:17 PM	#13
solus Senior Member Join Date: Apr 2014 Drives: 2014 Scion FRS (Ultramarine) Location: San Diego, CA Posts: 203 Thanks: 36 Thanked 64 Times in 42 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	So... will 18" Front 9.5" Rear 10.5" Offset Front -34Rear -46 fit with V1 fenders, max -2 camber and 255/35/18 up front and 275s in the back?

User Name		Remember Me?
Password