09-14-2016, 05:31 PM | #1 |
Member
Join Date: Aug 2015
Drives: 2015 WRB BRZ Limited
Location: Los Angeles, CA
Posts: 18
Thanks: 4
Thanked 2 Times in 1 Post
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Oil Leak?
I had a fender bender a couple month ago and the car ended in the bodyshop for almost 2 months. One day after I got the car back, I noticed a tiny oil stain on my garage. I opened the hood and saw some oil here and there in the engine bay.
The car is Jackson Racing Supercharged with oil cooler, there seems to be some leakage from the adapter for the oil cooler to the oil filter. The whole device seems loose when I tried to tighten it. But even after tightening it, I still saw a smaller oil stain on the garage floor the second day. I also cleaned some of the previously oil filled parts in the hood and they are clean the second day, meaning that the oil are probably not leaking from those places It seems like the oil stain on the floor only happens when I leave the car overnight, I tried to see if there's anything when I drive 5 mins to the gas station or run some errands and couldn't see any stains. How should I proceed? PS I am looking to change the oil asap so should I do that first and maybe see either what's going on (If there's any seals broken) or monitor if there are more oil stains after the oil change? I'll upload the pictures when I figure out how to do it. |
09-14-2016, 05:52 PM | #2 |
Member
Join Date: Aug 2015
Drives: 2015 WRB BRZ Limited
Location: Los Angeles, CA
Posts: 18
Thanks: 4
Thanked 2 Times in 1 Post
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Pictures
[IMG][/IMG] [IMG][/IMG] [IMG][/IMG] |
09-15-2016, 12:52 PM | #3 |
Join Date: Jul 2012
Drives: S2000 CR
Location: Orange County
Posts: 14,536
Thanks: 8,929
Thanked 14,181 Times in 6,837 Posts
Mentioned: 966 Post(s)
Tagged: 14 Thread(s)
|
Accidents are always unpredictable in damage.
However, my guess is the seal on the sandwich plate just needs replacing, based on the pictures. |
09-23-2016, 03:47 AM | #4 |
Senior Member
Join Date: Feb 2013
Drives: 2013 FR-S Whiteout MT
Location: Orange County CA
Posts: 535
Thanks: 102
Thanked 79 Times in 67 Posts
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
|
I had the same issue. I replaced the sandwich plate and its all good!
__________________
When in doubt, throttle out!
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Oil leak | GsxrMe | Forced Induction | 4 | 12-18-2015 08:23 PM |
Yet another oil leak.... | Astroboy | Mechanical Maintenance (Oil, Fluids, Break-In, Servicing) | 15 | 09-24-2015 01:02 AM |
oil leak ! | frsqc | Issues | Warranty | Recalls / TSB | 5 | 07-01-2015 07:08 PM |
Help - oil leak | tlim | Engine, Exhaust, Transmission | 4 | 04-10-2015 08:40 AM |
Oil leak. | ohnoitsthefuzz | Issues | Warranty | Recalls / TSB | 2 | 03-23-2015 01:31 AM |