4x114.3 Lug Hub Conversion? - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

M23 · 02-20-2015, 01:22 PM

(since I notice there's no thread about this yet (I've searched and only see a bunch of 5 lug, 5x114.3 conversion threads), I figured it might be a good idea to start one)

Can you convert the FT86 to 4x114.3?

If, yes, are there any 4x114.3 hubs (that can bolt up and has the same spline) and rotors (that have the same size as the stock FT86 rotors) that fit; for minimal parts changes, ease of install and ability to re-use the stock FT86 calipers?

This would be great for much much more wheel options. Especially if wanting to get old-school or classic wheels and/or wanting to go 16”. There’s literally hundreds of different, super awesome, lightweight, high quality, classic wheels, that AE86 people (and other classic Datsuns, etc.) have been using forever. Wheels not available in 5x100 (and never will be available in 5x100) and wheels that many people really want.

GT86drifter · 02-20-2015, 01:55 PM

its been done already

M23 · 02-20-2015, 04:12 PM

How and what parts though? (which hubs, rotors, etc.)

Even cheapy Konig Rewind 16x7 et0 would look pretty sweet (this pic is 15x7 et0 though). Highly and easily available too.

M23 · 02-23-2015, 02:53 PM

And image all the nice old-school 15" and 16" meshes you could get...if you had 4x114.3 hubs

02-20-2015, 01:22 PM	#1
M23 Banned Join Date: Sep 2014 Drives: 86 Location: Penisville SoCal Posts: 344 Thanks: 197 Thanked 88 Times in 58 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	4x114.3 Lug Hub Conversion? (since I notice there's no thread about this yet (I've searched and only see a bunch of 5 lug, 5x114.3 conversion threads), I figured it might be a good idea to start one) Can you convert the FT86 to 4x114.3? If, yes, are there any 4x114.3 hubs (that can bolt up and has the same spline) and rotors (that have the same size as the stock FT86 rotors) that fit; for minimal parts changes, ease of install and ability to re-use the stock FT86 calipers? This would be great for much much more wheel options. Especially if wanting to get old-school or classic wheels and/or wanting to go 16”. There’s literally hundreds of different, super awesome, lightweight, high quality, classic wheels, that AE86 people (and other classic Datsuns, etc.) have been using forever. Wheels not available in 5x100 (and never will be available in 5x100) and wheels that many people really want.

02-20-2015, 01:55 PM	#2
GT86drifter Drift Specialist Join Date: Oct 2012 Drives: 180SX,GT86 Location: JDM ONLY Posts: 1,041 Thanks: 237 Thanked 475 Times in 276 Posts Mentioned: 18 Post(s) Tagged: 1 Thread(s)	its been done already __________________ My 86 \| Instagram \| Store \| Limit Garage

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
BEST HID Conversion Kit out there??	VADER	Cosmetic Modification (Interior/Exterior/Lighting)	29	03-30-2017 07:50 AM
Anyone here used this Hub conversion?	jay1989	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	0	12-19-2014 10:33 PM
E85 conversion	ender2664	Engine, Exhaust, Transmission	6	09-15-2013 10:58 PM
jdm conversion here it is	jdmboss86	Cosmetic Modification (Interior/Exterior/Lighting)	2	06-28-2012 02:26 AM
LED Conversion	[M]	Cosmetic Modification (Interior/Exterior/Lighting)	38	06-18-2012 08:44 PM

02-20-2015, 04:12 PM	#3
M23 Banned Join Date: Sep 2014 Drives: 86 Location: Penisville SoCal Posts: 344 Thanks: 197 Thanked 88 Times in 58 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	How and what parts though? (which hubs, rotors, etc.) Even cheapy Konig Rewind 16x7 et0 would look pretty sweet (this pic is 15x7 et0 though). Highly and easily available too.

02-23-2015, 02:53 PM	#4
M23 Banned Join Date: Sep 2014 Drives: 86 Location: Penisville SoCal Posts: 344 Thanks: 197 Thanked 88 Times in 58 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	And image all the nice old-school 15" and 16" meshes you could get...if you had 4x114.3 hubs

User Name		Remember Me?
Password