[DarrenDriven]

This gets it started...

Originally Posted by jinrawke

I'd like to thank you for all your work gathering wheel information and have a quick question just to verify my math / logic is correct. So lets say I'm looking at 18x8 wheels at +32 offset. I see for the rear wheel, you have a silver star for the rear so I assume that +32 will come very close to flush which is a good thing. As far as the front I see you have a smiley face at +35.

So at stock height, that would mean the fronts would be sticking out by 3 mm?

You also mention that we would need to adjust the offsets when lowering the car.
Front - lowered 36mm (1.417 inch)
Rear - lowered 32mm (1.259 inch)

so conservatively I would need to be over +37 for the front and +38 for the rear?

Thanks for any help!