Quote:
Originally Posted by NoHaveMSG
For your tire setup, what you have now for sways should be adequate. Just having aftermarket sways similar to the setup you have now, served me fine until I went to adding aero.
I didn't really start needing more roll stiffness until recently. I was actually just PM'ing another member on here as I was having the same issue @ ZDan was having with mid corner understeer. |
To be more clear I am still on OEM sways. I just have the Perrin/Whiteline sitting in my garage staring me down.
I think I'll get them both installed using my prior thought process of keeping the stiffness proportional front and back and give it a shot. Worst case, I switch back to OEM or find a less stiff front bar and run the Perrin a bit softer.
Especially on a lift, sways can be swapped extremely easily so there is no harm in trying them out.
Thanks everyone for the quick responses