Quote:
Originally Posted by pkny
Working code for FR-S/BRZ/86:
Code:
Gauge Unit TXD RXF RXD MTH Note
Oil temp C 07E02101 010702E80324 3008 00010001FFD8 Required FW 4.05 or higher
Oil temp F 07E02101 010702E80324 3008 00090005FFD8 Required FW 4.05 or higher
Precise Fuel Level % 07C02129 046105290000 2808 000100010000 Faster refresh rate
Precise Fuel Level US Gallons 07C02129 046105290000 2808 052900640000 Faster refresh rate
Precise Fuel Level Liters 07C02129 046105290000 2808 01F4000A0000 Faster refresh rate
Seat Belt Beep Query 07C021A7 046115A70000 2808 000100010000 C0 for stock, 00 for disable
Seat Belt Beep Disable 07C03BA700 047B15A70000 2008 000100010000 Should return 0000. Replace '00' in the TXD with 'C0' to go back to stock.
Relative Throttle Position % 07E00145 044185450000 2808 03E800FF0000
Absolute Throttle Position % 07E00147 044185470000 2808 03E800FF0000
Fuel Pressure PSI 07E00123 046105230000 2810 006400450000
Fuel Pressure MPa 07E00123 046145230000 2810 000100010000
Attachment 28549 is the list of supported standard (mode 01) PID for 86/BRZ/FR-S. This list is created from the Wiki’PID, and I highlighted the ones that are supported by our cars.
Here is an example of how to make use of the doc I created:
From the Xgauge cansf list, the short Term Fuel Trim Bank 1 has the TXD 07E00106. The 01 (07E00106) is the mode #. The 06 (07E00106) is the PID. Now look at the doc I attached. It shows the PID 06 is supported, which means that xgauge code works on our cars. The PID 07, On the other hand, is not highlighted on the list. That means the Short Term Fuel Trim Bank 2 is not supported.
Thank you Andery for finding the PID and torque’s code for oil temperature. Without him, I don’t think I can get the oil temp for xgauge. |
I followed all of the steps, and cannot get the Oil Temp to work? It is just blank. I went through and made sure I had all 4 codes entered correctly, and then double checked again.
Firmware is version 4.12
Any help would be appreciated. Thanks!