Quote:
Originally Posted by OrbitalEllipses
That's not too bad, but replacing it every year of E85 use would be stupid. Someone find a filter solution that fits in this part!
|
Quote:
Originally Posted by SkullWorks
@ robispec
I it convenient to use some fine SST filter mesh to replace the filter (and increase flow, then use an inline filter as previously mentioned?
I have lots of varying grades (mesh sizes) here at my shop |
As I understand it, you have to cut the white plastic enclosure in order to access the filter, so there is no way to remove/replace that filter without rendering the part useless.
I don't have great pictures, but this one helps a bit.
That is the bottom part of the enclosure with the Fuel Pump sticking out and the sock filter. That enclosure wrapped around the FP is what holds the filter inside. There is no way to access the filter without cutting this plastic open.