Quote:
Originally Posted by CSG Mike
If it's not pulling and it doesn't bother you too much, don't worry about it. Do you have a printout from your last alignment that you can post so that I can verify that you have no thrust that might cause wear from scrub?
-Mike
|
I didn't get a printout this time. I was standing at the machine while it was being done and just letting him know when the toe was where I wanted it. My last alignment felt great, but I figured the toe was probably off since I did the springs. Nothing was really that far out. Had the pull the toe out a bit on one back wheel (it was at 5/32 in) and one front had a pinch of toe-in, the other front was already at 0.