Quote:
Originally Posted by EarlQHan
If you have the car, the kit, the suspension, and know the wheel size and offset it's fairly simple.
1. Mock up the fenders
2. Set the car's desired ride height and alignment
3. Measure the distance from the OEM wheel to the desired fender location
4. Do some simple math to figure how large of a spacer you need
Good luck
|
ordered parts :
Rocket bunny kit with gt wing
Enkei rs05rr 18x10 +30 front and 10x10.5 +22 rear
Bridgestone Tires 255/40 front 265/40 rear.
KW V3
Spacers 20mm front 30mm rear
Cross fingers. With this tho. Hoping everything will turn out as planned
