[Shankenstein]

What's in the box?
WHAT'S IN THE BOX?!?

2 x 230-10646 (caliper mounting bracket)
4 x 240-0476 (m12x1.75-40 bolts)
4 x 240-6320 (washers)
12 x 300-3686 (shims)
4 x 300-12846 (spacers)
1 x 160-6833 (passenger side rotor)
1 x 160-6834 (driver side rotor)
2 x 170-12845 (hats)
24 x 240-11240 (washer)
24 x 230-8037 (1/4x20-0.75 bolts)
1 x 120-11780 (passenger side caliper)
1 x 120-11781 (driver side caliper)
4 x 230-9183 (3/8-24 nuts)
4 x 240-10190 (washers)
4 x 230-9078 (3/8-16 x 3/8-24 x 2.50 studs)
1 x 240-1159 (BP-10 pads)
1 x 150-8855K (stainless brake lines from the EVO VIII)

For the record, piecing this together on Summit is $1700+... so just support your favorite vendor and get it from them.

I was looking to see how much a similar floating system could be pieced together for. I like the technology, but going for Essex Endurance is somewhat overkill for my application. We shall see.

Thanks for the pics, FT86SpeedFactory!