Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - View Single Post

Shankenstein · 02-15-2013, 01:41 PM

Got some time with the calipers and a printout.

Distance between strut bolts is 60.454 mm --> 2.4"
Thickness of lower flange is 25.4 mm --> 1"
Distance from strut center to lower bolt is 60.732 mm --> 2.4"
Length from lower bolt to upper mount top is 392 mm --> 15.4"
Upper thread is a M12x1.25-25, with 5 mm of thread relief
Diameter of damper rod is 22 mm
Diameter of spring perch is 60 mm
Distance from lower bolt to sway bar mount is 115 mm --> 4.5"
Distance from strut center to sway bar mount is 50 mm --> 1.97"
Diameter of sway bar mount is 10.2 mm --> 0.4"

02-15-2013, 01:41 PM	#4
Shankenstein Frosty Carrot Join Date: Jan 2013 Drives: The Atomic Carrot Location: Baltimore, MD Posts: 513 Thanks: 272 Thanked 431 Times in 199 Posts Mentioned: 19 Post(s) Tagged: 0 Thread(s)	Got some time with the calipers and a printout. Distance between strut bolts is 60.454 mm --> 2.4" Thickness of lower flange is 25.4 mm --> 1" Distance from strut center to lower bolt is 60.732 mm --> 2.4" Length from lower bolt to upper mount top is 392 mm --> 15.4" Upper thread is a M12x1.25-25, with 5 mm of thread relief Diameter of damper rod is 22 mm Diameter of spring perch is 60 mm Distance from lower bolt to sway bar mount is 115 mm --> 4.5" Distance from strut center to sway bar mount is 50 mm --> 1.97" Diameter of sway bar mount is 10.2 mm --> 0.4" __________________ If you think you're nerd enough, join in the discussions about Suspension and Aerodynamic modelling! Wall of Fame - JDL Auto Design, Raceseng, Vishnu Tuning, Penske Shocks, Nameless, Perrin, RaceComp Engineering, Essex/AP Racing, Verus, RacerX Wall of Shame - aFe Takeda, Wilwood, FA20Club