Quote:
Originally Posted by Dave-ROR
BTW I finally took a pic to show what I think @ Hanakuso was talking about when he mentioned grooving from the J-Hooks:
Obviously nothing to worry about, but I figured I'd see if this is what he meant. |
Similar but yours look a lot smaller then mine but at the same time mine are more pronounced where it creates a full circle around the whole rotor. I also noticed CSG_Mike and pcasso has them as well. If you look very carefully you also have 4 very small "indents" where the tips of the J-hooks end. I've look at other BBK that have similar vent/slots such as the Alcon hooks and they also create the same indents around the rotor so I'm not worried.
