Quote:
Originally Posted by fenixv8
Would any of you that have done the swap be able to measure the distance from front of the rotor hat or rotor to the end of the caliper towards the wheel spokes. Just to see how much is needed to fit the front calipers?
My prodrives have about 25mm more clearance than the stock wheels. Im wondering if that is going to be enough.
|
Okay the distance from the rotor hat to the furthest out point on the caliper near the spokes is about 1.5" or about 38 mm. My 18x8 +42 wheels only have about 1/4" or about 6 mm of clearance.