[OrbitalEllipses]

Originally Posted by dsgerbc

http://www.myturbodiesel.com/1000q/w...eels-5x100.htm

Bolt pattern will be ok, center bore is 1mm off, offset is aggressive, or the herrafrush kind, but might be ok. I doubt there is a .5mm hub ring, so you'll need proper lugs for the wheels to seat properly.
Audi uses ball seat (R14 iirc), so stock lugs won't work. Or will work for a couple of blocks until the first pothole.
GOOOD LUCK finding proper lugs. Some dude on the forum bought spacers, but there is no way to tell if the curvature in those is okay for Audi.

In short I wouldn't do it. Go to nasioc and find something. Should be plenty of peeps in NY area.

He said everything I said in a much more eloquent way, with way more information. Thanks!