Quote:
Originally Posted by ill86
Front offset is typically higher than the rear. Or they can be the same offset with staggered width. Or they could be the same offset and width.
Those wheels will "fit". Just depends how aggressive you want to get. Aggressive being how far you want the wheels to poke outward.
The first selection(s) in the link provided are the most aggressive fitment.
(+35/+15 or +35/+ 28)
While the lower selection in the link provided is the most conservative fitment.
(+48/+38)
The more aggressive the fitment the more negative camber, roll or pull you may need to avoid contact with the fender(s).
|
So what would you recommend?
I want to lower it about 1.25 - 1.5 inches.
When it comes to wheels, I know know nothing.
I just don't want anything to scrape. And the websit doesn't have the FR-S on it so I don't know what to do.