[Calum]

Originally Posted by Foobar

This is how I confirmed: ignition on the ON position, engine not started. Pull on the cruise control lever until you see the tach flip to 1K. Now push the cruise control lever up to cycle to 2K, 3K, and 4K, then push down to cycle back to 3K, 2K, and 1K.

If this works for you, then you've got map switching, and therefore the rest of the new RaceROM goodies.

Note that you can switch maps even while the engine is running, it's just easier to see the 1K tach setting with the engine off since it starts from 0. If you did it while the engine was idling, you're already right around 1K.

I've got the map switching, and have gone over 40 and hit the brake & pushed in the clutch. No blip.