If the tail-lights are indicative of what will be on the production version of the Subaru, I'll be buying aftermarket units with matte-black insides and LED bulbs.
As for the headlights, I'll probably remove them, crack them open, matte-black all the non-reflective parts, and put them back in. It gives a killer look to any headlight!
Note the difference....both are stock-units...one has been cracked open and blacked. The process is extremely simple. You simply remove the headlights, warm them in an oven for 10 min, and they pull apart. Then you tape off everything that needs to stay unobscured, spray, let it dry for a few hours, then put the headlight housing back together and warm it in the oven again to re-activate the adhesive.
