Quote:
Originally Posted by Racecomp Engineering
I like it. Is this last pic at ride height or in the air? How long are your endlinks? Is the middle setting on your rear bar about where the OEM bar hole is located?
I'd been toying with ideas for a new swaybar mount for 1st gen and GR86 but it's not easy to do it the way I want to without cutting anything. The BRZ mount is much easier to replace.
- Andrew
|
That was in the air, I've tweaked the design to move the bar up a little more and get the bar a bit more level.
The middle hole is where the OEM bar lands, I did test that but neglected to take pics (was too busy dropping the diff on my face
)
End links are custom ones I made out of McMaster parts, I didn't measure them, but they're about as short as you can make without getting custom heims/rod ends or modifying stuff.
The Revolution rear swaybar mount for first gens/GR86 is a pretty decent bolt on solution, but it could definitely be tweaked a bit to be more ideal.
https://www.rhdjapan.com/revolution-...-gr86-zn8.html