Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - View Single Post

DocWalt · 10-09-2023, 12:11 PM

Installed my hood vent, I'll link the STLs below. I'm going to update to make sure they're NASA legal (3/8" proud of the hood is their limit) and fix the slight modeling error that lifted the rear corners ~1mm from the hood surface. Feel free to grab them whenever, I'll make an "OLD" folder when I update so it will be obvious.

If folks are interested in purchasing, I'll probably make a few in ASA and I'm going to work on a rain guard design too now that I have it on the car and know it's about perfect.

https://drive.google.com/drive/folde...P5lla-KZQvtDdu

10-09-2023, 12:11 PM	#272
DocWalt Senior Member Join Date: Oct 2013 Drives: '22 BRZ Location: PA Posts: 1,956 Thanks: 2,429 Thanked 1,682 Times in 851 Posts Mentioned: 25 Post(s) Tagged: 2 Thread(s)	Installed my hood vent, I'll link the STLs below. I'm going to update to make sure they're NASA legal (3/8" proud of the hood is their limit) and fix the slight modeling error that lifted the rear corners ~1mm from the hood surface. Feel free to grab them whenever, I'll make an "OLD" folder when I update so it will be obvious. If folks are interested in purchasing, I'll probably make a few in ASA and I'm going to work on a rain guard design too now that I have it on the car and know it's about perfect. https://drive.google.com/drive/folde...P5lla-KZQvtDdu __________________ - Ken. H DocWalt's WRB 2013 BRZ Build Thread \| DocWalt's 2022 WRB BRZ Build Thread