11-27-2022, 02:05 PM
|
#4
|
|
Rust bucket enthusiast
Join Date: Feb 2017
Drives: 2013 Turbo Firestorm FRS
Location: Vermont
Posts: 4,160
Thanks: 3,447
Thanked 4,340 Times in 2,188 Posts
Mentioned: 34 Post(s)
|
Quote:
Originally Posted by red_door
Thanks for your input - do you know if it's any different on the 2nd gens? I've heard the fitment choices are worse and I don't want to order them based on info from the first gens.
|
Very good point. This is from the Apex website for the 17x9 ARC-8
- Front & Rear: 17x9" ET42
- Available in: ARC-8
- These wheels typically do not require any spacer. However, if additional negative camber has been dialed in at the knuckle, a 5mm front spacer may be needed.
- Depending on tire size/model and how negative camber is achieved, shaving the inner lip on the rear quarter panel may be required
Source - https://support.apexraceparts.com/hc...-Fitment-Guide
__________________
Turbo FR-S Build - Build Thread
JDL EL Recirc manifold, Boostlab BL58x Turbo w/ T51R, 17x9 ARC-8, IAG block
Last edited by DarkPira7e; 11-27-2022 at 02:34 PM.
|
|
|