Quote:
Originally Posted by Ultramaroon
Here's some discussion in his build thread. I have to find where he discusses transmission temps. Honestly, the possible detrimental effect of venting the hood is pure theory. The underside aero is all deliberate, and the exhaust heat must be shed. If I was considering a vented hood, I would take readings at key areas. One in particular is the hot spot in front of the right side sway bushing. Then I'd pull the hood and repeat the test.
Maybe there's no difference underneath. I almost feel bad for mentioning it.
|
Okay thanks for that. I did read a thread by Verus Engineering on their temps with and w/o the vents. They measured mild temp drops around the coil pack areas.
The main reason I want some heat relief from the vents is the freshly installed Oil Cooker.