Quote:
Originally Posted by steve99
you dont need custom map
the stock table can effectivly disable overun fuel cut
go to ecutek maps
select folder Fueling then Overun
open the Overun cutoff table
This table shows the rpm at different coolant temps where the ecu re-enables fueling
so if its got 1300 rpm means the ecu on overun stops fueling till rpm goes below 1300
so if you make those numbers big like 4000 it will fuel on overun to 4000.
note you will increase fuel consumption
as overun fueling is not an input to custom map it not easy to do in custom map
|
Thanks, am I doing this right? Can I customize the overrun fuel cutoff like this?
