[Robert97]

Originally Posted by EndlessAzure

Place the floor jack just behind the actual jacking point. It should be strong enough to support the weight. The car is stiff enough that the entire side of the car comes up no problem. Use a jack pad if you're worried about pinching or marring the rail. Then place the jack stands onto the normal jack points.

You can see in the below photo that the rear of the car is lifted (there isn't a stand there yet; you can count the one under the front pinch weld and the other 3 stands along the wall), even though the floor jack is pretty far forward. Obviously it's not safe to leave it this way, so place a jack at the rear position once you're raised

Thanks. I will try this.