Quote:
Originally Posted by almostquick
Nice setup. Can you give details on what battery hold down and fittings you went with? Also, is that the ATX12 battery?
|
It's the ATX20-RS
I got the mount from Checkered Sports
https://www.checkerdsports.com/colle...mount-atx20-rs
The wiring fittings are from Antigravity, but I purchased them through Checkered Sports with the mount.
https://www.checkerdsports.com/produ...pr_seq=uniform
The mounting position is decent. I drilled holes in the body and used self-tapping screws. The screws in the front are into some bracket with good thick metal. The screws in the back are in pretty thin sheet metal. Being as the whole assembly is pretty light, I think it'll be just fine.
I also put a couple strips of thin weather stripping under the battery to act as a cushion, plus the mount from Checkered Sports was a tiny bit taller then the battery.